Just did my first antutu test and the 820 seems to be a beast
from xda-developers http://ift.tt/1Se7ED7
via IFTTT
lundi 29 février 2016
Phone Showing Qrong Information On Battery (3000mah as 2000mah)
My device is Micromax Canvas 2 Colors (A120)....The original battery capacity was 2000mah.....Recently i replaced my swollen 2000mah battery with a 3000mah battery.....The battery is for the device Micromax A116 (Screenshot is attached).....The battery fits perfectly and has the same rating as of the original.......When i started using my phone the standby hours or talk time hours are not increased (i think the percentage drop is faster than the stock,now the percentage drop is 1% per 2or 3 min).....Then i checked my battery capacity using an app called phone tester ( screen shot is attached)...I have tried calibrating the battery but it didn't helped....Tried this in stock ROM and other custom Roms...... Please help me fix this....
from xda-developers http://ift.tt/1RC5VW5
via IFTTT
Anyone use oneplus cardboard with nexus 6p?
Trying to get it to work, image seems off though. Has anyone tried and gotten a good experience out of it?
from xda-developers http://ift.tt/1Se7CLJ
via IFTTT
What kernel can use in HydrogenOS？
Somebody can tell me What kernel can use in HydrogenOS. I like This design .but unfortunately is bad to use .So I want to find some things to help ？
from xda-developers http://ift.tt/1RC5U4q
via IFTTT
List of Devices/Roms that support OTG charging for car install
So it seems all I can really find is the Nexus 7 2012 and 2013 using Timur or ElementalX.
What else is out there?
I'm looking to install a tablet in my truck for advanced dash/obd functions. It needs to support charging while a USB device is plugged into the OTG Y-cable.
Thanks
What else is out there?
I'm looking to install a tablet in my truck for advanced dash/obd functions. It needs to support charging while a USB device is plugged into the OTG Y-cable.
Thanks
from xda-developers http://ift.tt/1Se7CLH
via IFTTT
Huawei P8, Root success, xposed, the success of the installation Gravitybox can't run
I want to ask: my P8 has root, and successfully installed the xposed framework program, most framework programs can be normal use, however, is the most important Gravitybox program can not run, don't know what the reason, who knows what's the solution?
from xda-developers http://ift.tt/1RC5TOa
via IFTTT
Vivid Case for Samsung S7 Edge review , a lots of photos
This is a review of the Black "Galaxy S7 Edge case,I got it for free , as the company from Texas contacted me to offer me free cases to exchange review . so here we are
Link http://ift.tt/1Se7CLD
PRO:
1. It solves the problem that the GS7E is all glass, so there is no grip. The case is very grippy A+ I can now hold it with one hand,
2. It looks great all the other cases on the market look "cartoony" with bright colors. Not too flashy looks exactly like the picture.
3. Case is fitted perfectly for the phone allowing use of the edge. I even like it better with it on because it barely catches the edge of my finger so my finger doesn't accidentally slide off when using some of the edge functions.
4. It doesn't interfere with wireless charging. I've tested this on both the Samsung wireless charger, and the Samsung fast wireless charger.
CON:
1. If you're expecting this case to give your phone any actual damage protection from a drop. It would be very minimal. The case is flexible but not as flexible as, say a gel case. So it will help against accidental dings while in your pocket situations along those lines.
The good news is that the Gorilla Glass 4 used in the manufacturing of the GS7e is incredibly strong,and envelopes the entire phone. You will probably never have to worry about scratches or moderate drops anyways. (I've already dropped mine 3 times in the first month before buying the case, and haven't seen any damage, scratches, etc.
My review is honest and unbiased , the discount will not affect my independent review
Link http://ift.tt/1Se7CLD
PRO:
1. It solves the problem that the GS7E is all glass, so there is no grip. The case is very grippy A+ I can now hold it with one hand,
2. It looks great all the other cases on the market look "cartoony" with bright colors. Not too flashy looks exactly like the picture.
3. Case is fitted perfectly for the phone allowing use of the edge. I even like it better with it on because it barely catches the edge of my finger so my finger doesn't accidentally slide off when using some of the edge functions.
4. It doesn't interfere with wireless charging. I've tested this on both the Samsung wireless charger, and the Samsung fast wireless charger.
CON:
1. If you're expecting this case to give your phone any actual damage protection from a drop. It would be very minimal. The case is flexible but not as flexible as, say a gel case. So it will help against accidental dings while in your pocket situations along those lines.
The good news is that the Gorilla Glass 4 used in the manufacturing of the GS7e is incredibly strong,and envelopes the entire phone. You will probably never have to worry about scratches or moderate drops anyways. (I've already dropped mine 3 times in the first month before buying the case, and haven't seen any damage, scratches, etc.
My review is honest and unbiased , the discount will not affect my independent review
from xda-developers http://ift.tt/1Se7EmO
via IFTTT
Need help restoring stock android (Galaxy S6 SM-G920I)
I recently purchased a factory unlocked Galaxy S6, and I decided to go ahead and install Xposed Framework (this is after I flashed XtreStoLite Deodexed). I installed XtreStoLite correctly, and I also installed TWRP.
After I went to install the Xposed Framework, I got stuck in a bootloop. I believe that I may have installed an incorrect version of it, although I'm not sure. I'd just like to reset the phone to its defaults - I did not have much saved on it to begin with since I decided to go ahead and mess with it encase of this happening. I unfortunately forgot to back up, since I thought that installing Xposed would be as easy as XSL. I'm able to provide any more information that anyone needs; I'd just like to get the phone working again.
I have already went ahead and loaded into TWRP and wiped the Dalvik, Cache, and I also formatted my data. I'm not sure what to do now, because it's still bootlooping. Any help would be appreciated.
After I went to install the Xposed Framework, I got stuck in a bootloop. I believe that I may have installed an incorrect version of it, although I'm not sure. I'd just like to reset the phone to its defaults - I did not have much saved on it to begin with since I decided to go ahead and mess with it encase of this happening. I unfortunately forgot to back up, since I thought that installing Xposed would be as easy as XSL. I'm able to provide any more information that anyone needs; I'd just like to get the phone working again.
I have already went ahead and loaded into TWRP and wiped the Dalvik, Cache, and I also formatted my data. I'm not sure what to do now, because it's still bootlooping. Any help would be appreciated.
from xda-developers http://ift.tt/21y1HXH
via IFTTT
Recovery backup problem, please help
So I bought this 128GB sd card on ebay and I tried to backup my system in recovery mode but when I tried to run the back up, it said "unable to mount storage" but when i go to es file explore and solid file explore, the sd card still there, I tried to format the card and what's weird is that it doesn't have fat32 format. Is it because of my card is defected?
from xda-developers http://ift.tt/21F6tiD
via IFTTT
Phone active while dozing?
Hi all,
During idle and sleep time I see my phone is still active during doze (not during idle_pending but during idle itself). I can constantly see the active line in the graph like bar code. Happens both in wifi and Lte.. I can't find any suspects using bbs and wakelock detectors.
Do u keep wifi turned off during night? If it's turned on, do u see the phone being awake.
BTW I have set the wifi frequency as 2.4 ghz only and my router is 2.4 ghz one..
During idle and sleep time I see my phone is still active during doze (not during idle_pending but during idle itself). I can constantly see the active line in the graph like bar code. Happens both in wifi and Lte.. I can't find any suspects using bbs and wakelock detectors.
Do u keep wifi turned off during night? If it's turned on, do u see the phone being awake.
BTW I have set the wifi frequency as 2.4 ghz only and my router is 2.4 ghz one..
from xda-developers http://ift.tt/1UvlZfc
via IFTTT
So where is the option to disable app drawer?
I heard a lot about it and was interested in seeing what my device would be like without an app drawer. However, I have yet to find any sort of toggle in the settings that allow me to show all the apps on the screen.
I have the T-Mobile varient.
I have the T-Mobile varient.
from xda-developers http://ift.tt/21F6sLC
via IFTTT
Microphone Problem after installing cm-13 unofficial.
Hi, i'm encountering a problem with the microphone of my one plus 2 that occured right after installing this custom ROM :
http://ift.tt/21F6qn6
What happens is that the mic doesn't work when making a normal call, but works just fine with audio notes/skype/whatsapp etc.
I'm thinking about 3g/4g problems since the mic works with wi-fi services as i see. Does anyone have the same problem? It's preatty annoying...
FUN FACT: my girlfriend called me 4 times today and couldn't answer because of this... needless to say she got angry at me :D :crying: sooo it's urgent :silly:
http://ift.tt/21F6qn6
What happens is that the mic doesn't work when making a normal call, but works just fine with audio notes/skype/whatsapp etc.
I'm thinking about 3g/4g problems since the mic works with wi-fi services as i see. Does anyone have the same problem? It's preatty annoying...
FUN FACT: my girlfriend called me 4 times today and couldn't answer because of this... needless to say she got angry at me :D :crying: sooo it's urgent :silly:
from xda-developers http://ift.tt/1UvlYYt
via IFTTT
Question about Android Monthly Patch ( changing my phone )
Hey guys, Im a proud owner of a Galaxy S2 whose buttons, unfortunetly, are starting to fail . Im looking for the Galaxy S7, however what keeps me afraid of continuing on Android is that after Samsung promisses for monthly update I dont see them being applied on the Galaxy S6 and Note 5 I from my colleagues in Brazil . Im afraid someone discovers a stagefright vulnerability type and my S7 takes too much time to receive a patch. Any comments?
P.S: Sorry for my poor english
P.S: Sorry for my poor english
from xda-developers http://ift.tt/21F6q6z
via IFTTT
220+ SMS / RINGTONES Mp3 Instrumentals and Themes FREE downloads
Hi everyone, I been using all sorts free great goodies for my phones from this site and its devs for some time now. I figured I should share some of my creations with all you good people. I made these ringtones from various instrumentals by croping, reducing lower frequencies, and amplifying them to sound better. There are over 220 of them from all different genres so everyone should find something they like (be patient and go through all the pages :p). I'm always looking for new ideas so please feel free to drop some requests and I'll do my best to do what I can to make that ringtone. Thanks again for all the help and support I receive here when needed :)
****RINGTONE GALLARY****
***LINK IN SIG***
****RINGTONE GALLARY****
***LINK IN SIG***
from xda-developers http://ift.tt/1UvlXUp
via IFTTT
Black screen on launch
Have SSU Pro installed. It was working.
Today when I launched it, I got just a black screen and then nothing. Had to hit the power button after hitting the "menu" button in order to get a working screen back (without a restart).
Removed SSU, restarted, reinstalled SSU, restarted, no difference. Can't get to root, but can't do anything there. Can see SU binary, but can't remove it.
Tried the latest beta, no difference.
Samsung Galaxy S5 Active G870A
Android 4.4.4
Any other info needed, please ask.
Today when I launched it, I got just a black screen and then nothing. Had to hit the power button after hitting the "menu" button in order to get a working screen back (without a restart).
Removed SSU, restarted, reinstalled SSU, restarted, no difference. Can't get to root, but can't do anything there. Can see SU binary, but can't remove it.
Tried the latest beta, no difference.
Samsung Galaxy S5 Active G870A
Android 4.4.4
Any other info needed, please ask.
from xda-developers http://ift.tt/1L0h7fS
via IFTTT
Keyboard has stopped working !!! please help
I'm using a Samsung A5 - SM500H device . I rooted my phone using Odin recently and everything was working fine . I recently downloaded Rom Toolbox ( free version ) from google play and went to change the font on my phone . for some reason i got a different font that was applied on my phone and on top im no longer able to use my keyboard , Every 2 seconds i get a pop up message saying " Unfortunately, Samsung keyboard has stopped. i did a factory reset , rebooted my phone , unrooted using SuperSU but still the same issue . I even downloaded the stock font on my phone using font installer but no luck .. any helpp please !?!!!
from xda-developers http://ift.tt/1ndW6D0
via IFTTT
[Q] using a old notebook with i686 CPU
when booting I get the message "This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot''
using a LG X110 Notebook CPU here http://ift.tt/1ndW51U can i see my CPU is 32-bit on it :confused:
using a LG X110 Notebook CPU here http://ift.tt/1ndW51U can i see my CPU is 32-bit on it :confused:
from xda-developers http://ift.tt/1L0h4Rj
via IFTTT
{q} why dont work dvb-tv?
Hi all.when,i connected dvb-tv to my phones (s2 and note3),dvb worked(about 1 year ago good worked) but now connect dongles (i have 2 dongles) dont work.
I test 3 antennas
I test 2 dongles (with my laptop worked fine)
I test 3 phones
I test 2 otg cable
But dont work
WHY????
Attachment 3665344Attachment 3665345
My apps for tv.[emoji116] Attachment 3665349
Sent from my SM-N9005 using Tapatalk
I test 3 antennas
I test 2 dongles (with my laptop worked fine)
I test 3 phones
I test 2 otg cable
But dont work
WHY????
Attachment 3665344Attachment 3665345
My apps for tv.[emoji116] Attachment 3665349
Sent from my SM-N9005 using Tapatalk
from xda-developers http://ift.tt/1L0h2c8
via IFTTT
Updating modem/baseband?
Whats the best way to update the modem on the Nexus 5x? Do i have to dl the entire factory image unzip and flash in bootloader mode? I dont see a modem thread at all, so Im assuming there are no flashable zips for modem updates for this device..why not?
from xda-developers http://ift.tt/1L0h0RN
via IFTTT
Newbie Questions
I have several questions that are frustrating me right now. Just over a week with this watch.
1) I am using the stock 3 dial watch face and want to have the weather dial use The Weather Channel or some other source for the weather besides Google Now. Does anyone know how to do this?
2) Today, the Fly Delta app showed me a boarding pass from last week 4 times. I finally had to block the application from working. What is the mechanism that makes this happen? I want to be able to use the boarding pass when needed, but what possesses it to send the boarding pass on it's own "good will". Especially when the flight was 7 days ago? If I am standing at the gate, what action do I take if the boarding pass isn't there?
3) Google Now keeps sending me notifications to leave for meetings even for appointments that I do not have notifications set up for. I have seen this many times over on older threads. I just want one notification on my watch and it should match what I have setup on my phone. Is there any solutions to this?
It seems that Google now is just running away with my watch. Not a positive experience so far.
Any suggestions would be appreciated.
1) I am using the stock 3 dial watch face and want to have the weather dial use The Weather Channel or some other source for the weather besides Google Now. Does anyone know how to do this?
2) Today, the Fly Delta app showed me a boarding pass from last week 4 times. I finally had to block the application from working. What is the mechanism that makes this happen? I want to be able to use the boarding pass when needed, but what possesses it to send the boarding pass on it's own "good will". Especially when the flight was 7 days ago? If I am standing at the gate, what action do I take if the boarding pass isn't there?
3) Google Now keeps sending me notifications to leave for meetings even for appointments that I do not have notifications set up for. I have seen this many times over on older threads. I just want one notification on my watch and it should match what I have setup on my phone. Is there any solutions to this?
It seems that Google now is just running away with my watch. Not a positive experience so far.
Any suggestions would be appreciated.
from xda-developers http://ift.tt/1ndVZr7
via IFTTT
Carrier specific forum?
I searched and couldn't find the T Mobile S7 forum. Is the phone too new still or an I wasting space and need to search better?
Still not sure how I got mine today, almost 2 weeks ahead of its release but I'm not going to complain.
Still not sure how I got mine today, almost 2 weeks ahead of its release but I'm not going to complain.
from xda-developers http://ift.tt/1L0gWBn
via IFTTT
Ex Display K-i-t-c-h-e-n-s Sale UK || Ex Display K-i-t-c-h-e-n-s Sale UK
Ex Display K-i-t-c-h-e-n-s Sale UK. Thirty Ex Display K.i.t.c.h.e.n.s To Clear. w*w_w [.] e x d I s p l a y k I t c h e n s 1 [.] C o [.] U k £ 595 Each with appliances. Tel 01616-694786
from xda-developers http://ift.tt/1ndVSvM
via IFTTT
Sm-g530r4 || Root & Xposed Framework
pictures are .PNG screenshots of JRummys' Root Check - verifies Root & Xposed Modules (XPrivacy) installed.
Samsung GRAND Prime - SM-G530R4 - LMY47X.G530R4TYU1AOL2
Root // XPOSED Framework // FlashFire
More than willing to write up a guide, however all of the instructions can be found right here on XDA.
Will void warranty.
Root Device w. CF-Auto-Root - http://ift.tt/1mlnrSR
Find listing for: LMY47X.G530R4TYU1AOF5 - this is the only G530R4 listing.
Samsung | SM-G530R4 | gprimelteusc | MSM8916 | LMY47X.G530R4TYU1AOF5 | 5.1.1
-Follow the XDA forum link above, then onward again to Chainfires' CF-Auto-Root Repository @ https :// autoroot.chainfire.eu
-This is the only firmware listed for the G530R4 device, it WILL work with any available Lollipop 5.1.1 firmware for the G530R4, use Odin tool included with CF-Auto-Root to flash.
-For me, this method did NOT restore stock recovery.img -- although I *think* it was because of KNOX / SELinux; either way it is a non-issue after next step.
Install XPOSED Framework w.
FlashFire v0.27 BETA required- http://ift.tt/1HcCcz8
-This tool is required to replace the function otherwise filled by a custom recovery capable of flashing .ZIP files directly to the device, from the device.
-MUST- Sign up for beta testing, to install the FlashFire beta APK this worked for me on the first try
- Note: AFTER YOU FLASH THE XPOSED .ZIP the first boot will take much longer than usual, entire flash & boot took ~15 minutes for me.
Xposed Installer APK http://ift.tt/1itL6PY
-Download either from PC or device; and install on device
[UNOFFICIAL][5.1.1/6][v80.0][11 Feb]Xposed for Samsung Lollipop/Marshmallow - http://ift.tt/1IZsDRS
XPOSED v80.0 SDK22 ARMv7 -
-The .ZIP file you want is "xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip" listed at the bottom of OP.
-Download .ZIP file and place it on the SD card of your device. Use FlashFire to flash the ZIP (I did not change ANY setting from default within FlashFire, follow all directions as specified for XPOSED installer, several appropriately timed reboots are required.
-- Afterwards, be sure to download all of Chainfires' apps (they're worth it) and donate.
from xda-developers http://ift.tt/1L0gS4I
via IFTTT
Z5 Premium VS Z5
hi guys,
for the Z5 Premium owners or the others who can give an advice... please which is the best and worth to have more than the other... The Z5 Premium or the regular Z5 ??
can you guys share with your experiences with Z5 Premium, the cons and pros ?
anything necessary before i take the decision whether i get a Z5 Premium or the Z5
thanks for any advice provided.
for the Z5 Premium owners or the others who can give an advice... please which is the best and worth to have more than the other... The Z5 Premium or the regular Z5 ??
can you guys share with your experiences with Z5 Premium, the cons and pros ?
anything necessary before i take the decision whether i get a Z5 Premium or the Z5
thanks for any advice provided.
from xda-developers http://ift.tt/1ndVPA4
via IFTTT
Stuck at logo booting when Install remix os on virtual box
Hi guys,
I tried to follow this tutorial and got stuck at booting logo. I also tried to reboot, type
while booting, but it doesn't help.
Does anyone know how to fix it?
I tried to follow this tutorial and got stuck at booting logo. I also tried to reboot, type
Code:
"DATA_IN_MEM=1" and "vga=791" Does anyone know how to fix it?
from xda-developers http://ift.tt/1L0gQJU
via IFTTT
[GAME][2.3+] Tricky Twister: little puzzle about colors and rotations
This puzzle is about colors, hexagons and rotations with touch-driven gesture game play. Game offers a new take on classical sliding tile puzzles and color matching games by introducing a new rotation principle for connecting hexagonal color tiles. Let's say - it's like Rubik's cube, but on flat surface.
Available on Google Play
Right now, there's only time-pressure based game mode: one minute to play the game, get as many points as possible. The goal is to create color clusters of five or more hexagons by rotating any circle of six neighboring tiles. Use natural gestures: touch and slide to rotate color hex tiles. Power-ups, bonus points and extra game time for removing 6+ hexagons or chain reactions
ScreenShots
I'm working/experimenting on more relaxed step-based game mode, but it's in early prototyping stage.
Available on Google Play
Right now, there's only time-pressure based game mode: one minute to play the game, get as many points as possible. The goal is to create color clusters of five or more hexagons by rotating any circle of six neighboring tiles. Use natural gestures: touch and slide to rotate color hex tiles. Power-ups, bonus points and extra game time for removing 6+ hexagons or chain reactions
ScreenShots
I'm working/experimenting on more relaxed step-based game mode, but it's in early prototyping stage.
from xda-developers http://ift.tt/1ndVNYO
via IFTTT
[Review] Tronsmart Dual USB Wall Quick Charger
Introduction
One can never have too many wall chargers; especially in a day and age where people own multiple devices or live in busy households with many cellphones users under the same roof. I am one of those people, so wall chargers with multiple ports often come in handy. There are plenty on the market, but which one is the right choice? Also, I'm not a professional photographer, so some of the pictures will be less than fantastic, especially when you consider the Nexus 5X I used sucks at close-ups for some odd reason. Anyways, lets dive into the Tronsmart 33W Dual USB wall charger.
Disclaimer: I received the reviewed products from Tronsmart in exchange for this review. I have no financial stake or affiliation with this company. I've actually never even owned a Tronsmart product before. No bias exists here.
Details
Initial Impressions
Along with the charger, I received boxes of Black and White USB-C and USB-A to USB-C cables (four cables total). This review will not focus on the performance of the cables, as they have already been reviewed here. They do, however, adhere to the USB-C standard.
The packaging is pretty standard. They're cables and chargers, so nothing fancy is really required here. I did notice, almost immediately, the USB 2.0 logo. I'm a little disappointed that the cables are not USB 3.0 but we're really treading into nitpicking territory here. My Nexus 5X isn't USB 3.0 capable but my future devices down the road might be.
My first impressions of the charger are good. It's made of a mixture of textured and gloss plastic, the design itself is quite attractive. There are no visible seems or sharp edges in the plastic. Additionally, it has a nice heft to it, sometimes indicative of quality. The swiveling mechanism moves with an authoritative "snap", inspiring further confidence in the build quality of the product.
As mentioned previously, I received two USB-A to USB-C cables, one black and one white, and two USB-C cables in the same color arrangement. The cables are terrific. The first thing I noticed was that the cables are a bit thinner than the Choetech cables I have (same gauge as the cable that came with the phone), but are far more flexible. The flexibility is nice when charging the phone on my desk so I don't have to bend and manipulate the cable to get it in a state where it's not constantly tugging on my phone. With the less flexible Choetech cable, I felt that sometimes the cable with putting a lot of stress on the charging port of the phone. I don't have this concern with the Tronsmart cables. This is also great for travelling where I can easily coil them up and throw them in a bag without having to twisty-tie them together. The ends of the cables are also a bit nicer as well. The USB-C ends having a sloped, ergonomic shape that fits my fingers quite well.
Design and Features
The charger sits in a normal wall outlet vertically. When plugged in, it has an indicator light that glows green, which is a nice touch, but doesn't really mean anything other than that your wall outlet is working.
The charger has two ports. A USB-C port and USB-A port. The USB-C port is a Qualcomm QuickCharge 3.0 capable port. An ability that my Nexus 5X can't take advantage of, but is much appreciated by me nonetheless. I'm sure the charging speed will come in handy in the future. The USB-A port is a "Volt iQ" port. Volt iQ is essentially a small circuit that is able to detect the current required by the device that's being charged. It's a pretty cool feature that expands the compatibility of this charger to almost any device, even Apple products or older devices before standards (like 2.1A charging) were set in the industry.
Performance
I'm gonna be honest here, I had planned on presenting a bunch of data and results from readings taken using the popular app, Ampere. Unfortunately, readings were so sporadic I didn't even bother to continue with recording the information. I'm assuming this has more to do with the phone and its battery temperature / CPU usage and less to do with the actual charger itself. I can tell you that a pattern that quickly emerged is that the phone would not charge any faster than 2540mAh from either port, using any of the supplied cables.
2540mAh is a very respectable number and while the phone is capable of charging at 3000mAh, this number doesn't really bother me because, if anything, the battery will stay healthier longer.
It should also be mentioned that immediately after receiving these cables I visited a good friend of mine for a weekend. He has two young dogs, one German Shepherd that's 6 months old. To my dismay, I came downstairs one morning to find the dog chewing on the cable. I removed the cable from the dog's mouth and to my surprise, there was no damage to the cable. If anything this is a testament to the cable's durability. Teething Puppy-Approved.
Overall
Overall, I'm quite happy with the quality and performance of the charger and the cables. I
One can never have too many wall chargers; especially in a day and age where people own multiple devices or live in busy households with many cellphones users under the same roof. I am one of those people, so wall chargers with multiple ports often come in handy. There are plenty on the market, but which one is the right choice? Also, I'm not a professional photographer, so some of the pictures will be less than fantastic, especially when you consider the Nexus 5X I used sucks at close-ups for some odd reason. Anyways, lets dive into the Tronsmart 33W Dual USB wall charger.
Disclaimer: I received the reviewed products from Tronsmart in exchange for this review. I have no financial stake or affiliation with this company. I've actually never even owned a Tronsmart product before. No bias exists here.
Details
- Device: Tronsmart W2PTE Dual USB Quick Charger
- Price: $21.99 (at the time of this review)
- USB-A Output: 5V/3A(MAX)
- USB-C Output: 3.6V-6.5V/3.0A,6.5V-9V/2.0A,9V-12V/1.5A(MAX)
Initial Impressions
Along with the charger, I received boxes of Black and White USB-C and USB-A to USB-C cables (four cables total). This review will not focus on the performance of the cables, as they have already been reviewed here. They do, however, adhere to the USB-C standard.
The packaging is pretty standard. They're cables and chargers, so nothing fancy is really required here. I did notice, almost immediately, the USB 2.0 logo. I'm a little disappointed that the cables are not USB 3.0 but we're really treading into nitpicking territory here. My Nexus 5X isn't USB 3.0 capable but my future devices down the road might be.
My first impressions of the charger are good. It's made of a mixture of textured and gloss plastic, the design itself is quite attractive. There are no visible seems or sharp edges in the plastic. Additionally, it has a nice heft to it, sometimes indicative of quality. The swiveling mechanism moves with an authoritative "snap", inspiring further confidence in the build quality of the product.
As mentioned previously, I received two USB-A to USB-C cables, one black and one white, and two USB-C cables in the same color arrangement. The cables are terrific. The first thing I noticed was that the cables are a bit thinner than the Choetech cables I have (same gauge as the cable that came with the phone), but are far more flexible. The flexibility is nice when charging the phone on my desk so I don't have to bend and manipulate the cable to get it in a state where it's not constantly tugging on my phone. With the less flexible Choetech cable, I felt that sometimes the cable with putting a lot of stress on the charging port of the phone. I don't have this concern with the Tronsmart cables. This is also great for travelling where I can easily coil them up and throw them in a bag without having to twisty-tie them together. The ends of the cables are also a bit nicer as well. The USB-C ends having a sloped, ergonomic shape that fits my fingers quite well.
Design and Features
The charger sits in a normal wall outlet vertically. When plugged in, it has an indicator light that glows green, which is a nice touch, but doesn't really mean anything other than that your wall outlet is working.
The charger has two ports. A USB-C port and USB-A port. The USB-C port is a Qualcomm QuickCharge 3.0 capable port. An ability that my Nexus 5X can't take advantage of, but is much appreciated by me nonetheless. I'm sure the charging speed will come in handy in the future. The USB-A port is a "Volt iQ" port. Volt iQ is essentially a small circuit that is able to detect the current required by the device that's being charged. It's a pretty cool feature that expands the compatibility of this charger to almost any device, even Apple products or older devices before standards (like 2.1A charging) were set in the industry.
Performance
I'm gonna be honest here, I had planned on presenting a bunch of data and results from readings taken using the popular app, Ampere. Unfortunately, readings were so sporadic I didn't even bother to continue with recording the information. I'm assuming this has more to do with the phone and its battery temperature / CPU usage and less to do with the actual charger itself. I can tell you that a pattern that quickly emerged is that the phone would not charge any faster than 2540mAh from either port, using any of the supplied cables.
2540mAh is a very respectable number and while the phone is capable of charging at 3000mAh, this number doesn't really bother me because, if anything, the battery will stay healthier longer.
It should also be mentioned that immediately after receiving these cables I visited a good friend of mine for a weekend. He has two young dogs, one German Shepherd that's 6 months old. To my dismay, I came downstairs one morning to find the dog chewing on the cable. I removed the cable from the dog's mouth and to my surprise, there was no damage to the cable. If anything this is a testament to the cable's durability. Teething Puppy-Approved.
Overall
Overall, I'm quite happy with the quality and performance of the charger and the cables. I
from xda-developers http://ift.tt/1L0gPWk
via IFTTT
LG G3 screen fading/flickering fix
Had this issue, and not much information of how to fix it in online. Came across a 'fix" for it, tried it, and so far so good.
https://www.youtube.com/watch?v=gAUkXLR7eQI
https://www.youtube.com/watch?v=gAUkXLR7eQI
from xda-developers http://ift.tt/1L0gPpk
via IFTTT
I have made a terrible mistake...
If you haven't tried Gear VR yet, I don't recommend it! I happened to be in Best Buy and the mobile guy talked me into trying it. It is so insanely awesome! Now my wait for my phone is going to be so much more painful. :(
from xda-developers http://ift.tt/21xOtdv
via IFTTT
[ROM] ModifiedStock_G902P_OL1
This Rom is built from BoostMobile G902PVPU3BOL1 Stock Firmware. Modified by me.
ROM FEATURES
Debloated. Boost Bloat, google apps you can get from platstore. and some other things.
rooted
SuperSU Free v2.67 installed.
knox removed...think I got it all. lol
init.d. with loopysmoothness. more to come.
Buildprop Tweaks.
Adaway
SmartManager/with Auto Restart in settings/Backup and reset. thanks @tdunham for guide
Removed BoostMobile Bootanimation, replaced with SAMSUNG.
gotta say , not responsible for anything you choose to do to your phones.
I hope someone will enjoy!
DOWNLOAD LINK
2/29/16
http://ift.tt/21xOsWV
ROM FEATURES
Debloated. Boost Bloat, google apps you can get from platstore. and some other things.
rooted
SuperSU Free v2.67 installed.
knox removed...think I got it all. lol
init.d. with loopysmoothness. more to come.
Buildprop Tweaks.
Adaway
SmartManager/with Auto Restart in settings/Backup and reset. thanks @tdunham for guide
Removed BoostMobile Bootanimation, replaced with SAMSUNG.
gotta say , not responsible for anything you choose to do to your phones.
I hope someone will enjoy!
DOWNLOAD LINK
2/29/16
http://ift.tt/21xOsWV
from xda-developers http://ift.tt/21EYh20
via IFTTT
random crash of google products after app update in s4 mini.
Greetings
i had recently updated the google apps like maps,google play services, google play games along with other random apps like imo, peel smart remote, messenger etc . i was on a whatsapp call when i was switching from WiFi network to mobile data . No sooner i did that, the google services stopped working and the phone restarted. once it was in, the maps stopped working. i kept getting the message "unfortunately google services stopped working " a couple of times.
Now even the google play app is missing from the app drawer.
i have encountered the same issue before and i had to do a hard reset along with clearing the cache in recovery mode to fix it.(i lost my root privileges in that process. )
kindly assist
i had recently updated the google apps like maps,google play services, google play games along with other random apps like imo, peel smart remote, messenger etc . i was on a whatsapp call when i was switching from WiFi network to mobile data . No sooner i did that, the google services stopped working and the phone restarted. once it was in, the maps stopped working. i kept getting the message "unfortunately google services stopped working " a couple of times.
Now even the google play app is missing from the app drawer.
i have encountered the same issue before and i had to do a hard reset along with clearing the cache in recovery mode to fix it.(i lost my root privileges in that process. )
kindly assist
from xda-developers http://ift.tt/21xOqym
via IFTTT
Whats the point posting ROMS when they DONT work fully and still have bloatware etc.?
Am i missing something, but when I came to XDA in the past it had ROMs that were better than stock ROMs. By that I mean they were faster, de-bloated and included better features. Now they all seem to just be higher android versions ported from newer phones but with most of the same bloatware and worse still, broken features like camera modes, gps or echo etc.
I just seems like there is no real gain from moving away from stock ota updates? What am i missing? I wish Cyanogen officially supported the g850F will all features working 100% !!!:confused:
I just seems like there is no real gain from moving away from stock ota updates? What am i missing? I wish Cyanogen officially supported the g850F will all features working 100% !!!:confused:
from xda-developers http://ift.tt/21EYdzh
via IFTTT
XDA Stylish CSS Theme
Hello all, I present to you a darker stylish theme for xda forums, keeping with the spirit of original xda colors. I prefer a darker theme for many reasons and a lot of other folk agree, so I created my own theme. This still a WIP, but most is themed, I will update this post when I make edits.
Source: http://ift.tt/21xOq1o
Preview:
Source: http://ift.tt/21xOq1o
Preview:
from xda-developers http://ift.tt/21xOs9o
via IFTTT
[HELP] Samsung Galaxy SIII - HARD BRICKED
Dear friends,
I have problems with Samsung Galaxy SIII - i9300.
This phone not inicialize in recovery mod just in download mode.
I try install the original rom but occur this errors below:
Re-Partition operation FAILED
- Theres is not PIT
- Getin MAP
Sorry for my bad English, I am Brazilian :laugh:
I have problems with Samsung Galaxy SIII - i9300.
This phone not inicialize in recovery mod just in download mode.
I try install the original rom but occur this errors below:
Re-Partition operation FAILED
- Theres is not PIT
- Getin MAP
Sorry for my bad English, I am Brazilian :laugh:
from xda-developers http://ift.tt/21EYd2c
via IFTTT
900T Root (4.4.2 UVU1CNK2)
Hi all, just acquired a 900T on 4.4.2 UVU1CNK2. Planning on installing CM13 but first a few questions:
1) Should I OTA update before rooting and installing CM to update the baseband version?
2) If not - what is the easiest way to root on this version? (I've read about towelroot, through odin, etc - just wondering what is the most up to date way)
Thanks!
1) Should I OTA update before rooting and installing CM to update the baseband version?
2) If not - what is the easiest way to root on this version? (I've read about towelroot, through odin, etc - just wondering what is the most up to date way)
Thanks!
from xda-developers http://ift.tt/21xOoGQ
via IFTTT
Came across a new problem I can't find anywhere else.
I've recently come across a new issue on my T-mobile Galaxy Note 4 that I haven't seen before. I've been searching online as well and can't seem to find anyone else posting about this problem either. I'm not the best but I have some experience. I've recently rooted and flashed tekxodus hybrid n4 5 1 1 rom on my note 4 through TWRP recovery. It took a few tries but everything worked. After using it for 3 days, I decided to turn it off and hard reboot it which I've done plenty of times before. But this time, upon rebooting it starts up and shows the tmobile logo screen and turns black. Vibrates twice as if you plugged it into the charger but remains black, and stays that way. If i plug it into the charger it shows the green battery screen and charges normally. I can enter twrp recovery and download mode as well. But it just can't get past the logo screen. I've also tried using a different note 4 battery from other videos, clearing the cache, delvik-cache, but nothing seems to work. As earlier mentioned, I can't seem to find any other post with this exact problem so I've come to reddit for help. Thank you in advance for any feedback.
from xda-developers http://ift.tt/21EYbaI
via IFTTT
is cyanogenmod 13 available for the SM-G920T1 Model? Please help :'(
I have been trying to removed the rent a center lock from my galaxy s6 Model SM-G920T1 for months now and i have had no luck. From the countless hours of research I've done I have discovered that the only way to remove the lock is by installing the cyanogemod rom to my device but I haven't been able to find a download for my model. All the download I've found say they are only compatible with other models. Please someone post a link to a cyanogenmod 13 download for my s6 model or tell me if there is none. If there is any other way of removing the rent a center lock from the galaxy s6 SM-G920T1 please let me know. Thank you in advance.
from xda-developers http://ift.tt/21xOpdO
via IFTTT
SlickScript for LP/MM
I have decided to release an all-in-one package to turn any LP/MM Rom into SlickROM (Fulmics/Blacksoul have done a great job with LP/MM and it's pointless to waste bandwith).
This package features:
Uploading!
XDA:DevDB Information
SlickScript, Tool/Utility for the LG G3
Contributors
nygfan760, nygfan760
Version Information
Status: Testing
Created 2016-03-01
Last Updated 2016-02-29
This package features:
- Init.d Support
- Debloat with slim replacements for essential apps
- An init.d script with every tuned parameter I've used in SlickROM (governors, schedulers, deep level kernel parameters, etc.)
- Other secret goodies
Uploading!
XDA:DevDB Information
SlickScript, Tool/Utility for the LG G3
Contributors
nygfan760, nygfan760
Version Information
Status: Testing
Created 2016-03-01
Last Updated 2016-02-29
from xda-developers http://ift.tt/21EYaDt
via IFTTT
Disable fingerprint vibration?
Is there a way to disable the vibration that occurs when using the fingerprint scanner on stock rom rooted?
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
from xda-developers http://ift.tt/21xOnT5
via IFTTT
Can't Change Default Downloader
I'm using a Samsung Galaxy Tab Pro 8.4 SM-T320 running CM 12.1 build LMY48B. When I try to dowload a file using chrome it doesnt give me the option to choose my downloader, in this case es file explorer. I have cleared the defaults for both apps, cleared data for both apps and wiped my cache partition acording to another tip. Before on the stock rom i had the option to chooose my downloader. Please help!
from xda-developers http://ift.tt/21EY9Q7
via IFTTT
[Q - How do] How do Unlock Sim 01 for Honor 4x Che1-CL1
just received my Honor 4X in China. It's a nice phone with incredible features for a low price. As I travel a lot between China and Viettel Sim.
What I did not realize (Chinese description) was the fact that SIM1 is locked for China Telecom. SIM2 accepts my Viettel SIM (vietnam) but only with 2G.
Any Idea how to unlock SIM1 so that I can use LTE with my Viettel SIM card?
Thanks All
What I did not realize (Chinese description) was the fact that SIM1 is locked for China Telecom. SIM2 accepts my Viettel SIM (vietnam) but only with 2G.
Any Idea how to unlock SIM1 so that I can use LTE with my Viettel SIM card?
Thanks All
from xda-developers http://ift.tt/21xOnmh
via IFTTT
Note 3 sm-n900t
Hi, i own a note 3 t mobile with Android 5 with root access. I would like to install a custom room. What room do you recommend me¿
from xda-developers http://ift.tt/1Qoh9P3
via IFTTT
Zooper widgets
I've been searching around and I found a big thread on XDA with all the RRO Layers and Nav bars, but I haven't found a dedicated area outside of a Google+ page for Zooper widgets in .zw form for download. Is there a master thread or large thread where these are usually posted ?
from xda-developers http://ift.tt/1ndJKuL
via IFTTT
CONVERSION Lg g3 Verizon VS985 >TO Lg g3 D855 STOCK MARSH 6.0 T-MOBILE LTE
!!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
!!! I AM NOT RESPONSIBLE FOR ANY PROBLEMS THAT OCCUR WHILE INSTALLING/USING THIS !!!
MAKE A BACKUP OF YOU DATA OR YOUR ROM.
WORKS DATA , SMS , MMS , LTE , WIFI HOTSPOT IS NOW WORKING ................, NO WORKING AUDIO ON CALLS "Restricted Access Changed" "Voice Service Is Blocked" Issue.
!!! I AM NOT RESPONSIBLE FOR ANY PROBLEMS THAT OCCUR WHILE INSTALLING/USING THIS !!!
MAKE A BACKUP OF YOU DATA OR YOUR ROM.
- 1-WIPE DATA, CACHE, AND DLVIK.
- 2-INSTALL VS98546A Firmware STOCK ZIP THANKS TO xdabbed
- 3-INSTALL LG-D85530B-Flashable.System ZIP THANKS TO autoprime
- 4-INSTALL vs98535b bootstack.zip THANKS TO xdabbed
- 5-REBOOT DONE
WORKS DATA , SMS , MMS , LTE , WIFI HOTSPOT IS NOW WORKING ................, NO WORKING AUDIO ON CALLS "Restricted Access Changed" "Voice Service Is Blocked" Issue.
from xda-developers http://ift.tt/1Qoh65J
via IFTTT
EE (T-Mobile UK) Wifi Calling - How to access?
Hello, Can someone tell me how to activate wifi calling via settings or firmware update given it is not officially supported? I once saw a post how to do this but cannot find it anymore. I am running stock ROM but am happy to flash and root. Thank you.
from xda-developers http://ift.tt/1Qoh3H4
via IFTTT
Galaxy Mega 2 wont start!!!
Hello everyone,
Í have a mega 2 (sm -g750a) the phone was charging and when I try to turn on... Don't do anything no led no boot I see different topics but I'm not sure what to do... I'm looking a board but it expensive maybe somewhere are a tool to resolve my problem boot. img or something to revive... What do you advise me? :(
Í have a mega 2 (sm -g750a) the phone was charging and when I try to turn on... Don't do anything no led no boot I see different topics but I'm not sure what to do... I'm looking a board but it expensive maybe somewhere are a tool to resolve my problem boot. img or something to revive... What do you advise me? :(
from xda-developers http://ift.tt/1ndJBYb
via IFTTT
i can't change battery icon cm12.1 (systemUI)
hi guys.
i can't change icon battery status bar in cm12.1 on files systemui
i can't change icon battery status bar in cm12.1 on files systemui
from xda-developers http://ift.tt/1Qoh1ip
via IFTTT
Flashed to Stock Rom, but now have "No Service"
Hello, First time poster, and quite frankly a noob at a lot of this. Here's my issue, i have a at&t Samsung Galaxy S4 that i recieved from a family member that was stuck in a serious boot loop. Only way i could get it to come back was to flash the stock firmware, which worked excellent....now my issue, it seems like about 98% of the time i have the "No Service" icon up top. I got the phone locked through at&t but have since unlocked it to use on Straight talk, as thats what i was originally advised to do by an at&t member (turns out I didnt even need to do this in the first place as ST is just using the at&t towers as a reseller). Unlocked phone, still no service. I had ST previously in a Galaxy S2 in my current location and service was superb, so i know its not a carrier issue. Is it possible that when i flashed stock rom, that i missed something? I checked around and it seems like my modem is updated to the latest setting. When i switched it to ST after about 30 minutes the signal popped up and it seems like as soon as it showed up, it was gone again. Since that point i've been able to make 1 call (I activated ST about 4 days ago) and that call was today, with only 1 bar of reception. Shortly after that call the signal dropped completely again. I am at a complete loss as to why it refuses to get any reception. I was thinking maybe the modem needs to be updated, but the wifi works perfect, and the reception seems to show up (just as 1 little bar) rarely. Anyone have any ideas?
from xda-developers http://ift.tt/1ndJv2I
via IFTTT
[GUIDE] Tweaking Interacting Gov
Hey guys, Kyuubi10 back once again with another Guide.
I thought it might be useful to pop in a couple results of my trial and error for the HTC One M8.
Note: This is not scientifically, calculated accurate, but it's close enough, based on estimates.
After following these guides:
http://ift.tt/1v1cIhc
http://ift.tt/1ndJsnu
I decided to make a summary guide of the above but with specific HTC One M8 values.
Since I agree with the idea of "race to idle" embodied in the Wheatley governor, I tried emulating that on the Interactive governor while also keeping it as efficient as possible.
Here are the values (all others not mentioned, leave default):
"above_hispeed_delay" makes sure that longer time is spent on the frequency step 1.72Ghz, before quickly raising higher into max freq.
1.72Ghz is the most energy efficient frequency with a good performance, e.g. it will not cause lag during casual usage, while it uses minimal voltage.
If the load is too high for this frequency to handle, I set the time short once it's gone over this freq step so that it will not waste time before reaching max freq. Thus dealing with the issue asap.
Another important parameter is "target_load", with this I have defined that at each efficient freq step the load needed to overcome it would be higher than normal. But it would up-scale quickly when using non-efficient frequencies.
The other parameters I have set so that the frequency is lowered as soon as CPU load is finished, so that it will rush back to idle as quickly as possible.
The interesting thing about this set-up is that for general, non heavy usage, it basecally functions as if I have underclocked to 1.72Ghz, but when the CPU is truly pushed it reaches up to 2.5Ghz which is my Overclocked max freq value.
Thus both saving battery and providing high performance.
I have felt no lag, and it's been quite a smooth experience while I used this :)
Combined with using GPU rendering (found in developer settings), and Seeder, the over all usage is pretty good.
Battery usage has been very efficient and I have managed to squeeze out an extra hour or two using this.
I highly recommend it!
Hope I helped you guys... don't forget to press the thanks button if you also feel that I did!:good::good:
I thought it might be useful to pop in a couple results of my trial and error for the HTC One M8.
Note: This is not scientifically, calculated accurate, but it's close enough, based on estimates.
After following these guides:
http://ift.tt/1v1cIhc
http://ift.tt/1ndJsnu
I decided to make a summary guide of the above but with specific HTC One M8 values.
Since I agree with the idea of "race to idle" embodied in the Wheatley governor, I tried emulating that on the Interactive governor while also keeping it as efficient as possible.
Here are the values (all others not mentioned, leave default):
Code:
above_hispeed_delay - 80000 2265600:10000
go_hispeed_load - 95
hispeed_freq - 1728000
io_is_busy - 1
min_sample_time - 10000
target_loads - 45 729000:80 883200:50 1267000:85 1497600:50 1728000:90 1958400:50
timer_rate - 10000
timer_slack - 5000 1.72Ghz is the most energy efficient frequency with a good performance, e.g. it will not cause lag during casual usage, while it uses minimal voltage.
If the load is too high for this frequency to handle, I set the time short once it's gone over this freq step so that it will not waste time before reaching max freq. Thus dealing with the issue asap.
Another important parameter is "target_load", with this I have defined that at each efficient freq step the load needed to overcome it would be higher than normal. But it would up-scale quickly when using non-efficient frequencies.
The other parameters I have set so that the frequency is lowered as soon as CPU load is finished, so that it will rush back to idle as quickly as possible.
The interesting thing about this set-up is that for general, non heavy usage, it basecally functions as if I have underclocked to 1.72Ghz, but when the CPU is truly pushed it reaches up to 2.5Ghz which is my Overclocked max freq value.
Thus both saving battery and providing high performance.
I have felt no lag, and it's been quite a smooth experience while I used this :)
Combined with using GPU rendering (found in developer settings), and Seeder, the over all usage is pretty good.
Battery usage has been very efficient and I have managed to squeeze out an extra hour or two using this.
I highly recommend it!
Hope I helped you guys... don't forget to press the thanks button if you also feel that I did!:good::good:
from xda-developers http://ift.tt/1QogZai
via IFTTT
dimanche 28 février 2016
Is TouchWiz as bad as they say?
Quick backstory: My phone history is HTC Thunderbolt, HTC Droid DNA, HTC One M8 and the Nexus 6 (since the M9 didn't show me anything good enough). I've stayed away from Galaxy phones since I heard that the OS on top of Stock was laggy and overall not very good. Obviously they've fixed things since it's a hugely popular phone, but compared to Sense and Stock, is it comparable, or even better at this point? Thanks for your time.
from xda-developers http://ift.tt/1Lp0PgD
via IFTTT
Cant enter recovery to flash ROM ..idk if bricked?
hi guys ..im new to this forum stuff so if im in wrong section im sorry lol.. ok.. so im not sure how to explain this, but i was flashing over my HTC ONE M9 and for some reason it bootlooped back to the bootloader after completion and i was flashing Android Revolution HD 20 .. and then i went to upgrade the TWRP to 3.0 and idk what happened but it failed and now i cant load into recovery mode or download mode.. it says 0PJAIMG missing.. it just says failed to boot into recovery and back to the bootloader and im not sure how to load back a stock ROM or any ROM for that matter.. :confused: :(
from xda-developers http://ift.tt/1Lp0OJA
via IFTTT
Can I run a custom ROM on an emulator?
I was thinking on testing the waters of making a custom android ROM. I read that I would have to test it out on my device, but I don't think I can afford that(literally and metaphorically). I'm wondering if it's possible to run the custom ROM on an emulator on my PC? Thanks in advance.
from xda-developers http://ift.tt/1LOJSam
via IFTTT
Android 5.0 and Wired Headset Problem.
Recently, I factory reset my SGS5 (900i) and returned to a stock Android 5.0 ROM.
Since then, I have noticed that whenever I plug a pair of Phillips wired headphones into the jack, I can't use the single button on the headset without soft booting the phone. I plug the headset in and choose the app I want to listen to audio through but the button doesn't respond. However, if I reboot my phone, I regain full functionality for a little while before the problem returns. The issue is not confined to a single set of headphones and the headphones work perfectly in other devices. I believe the issue is related to the Android OS.
I read that it might be an issue with Now cards so I disabled them and I thought I might have solved it. However the problem has persisted.
Since then, I have noticed that whenever I plug a pair of Phillips wired headphones into the jack, I can't use the single button on the headset without soft booting the phone. I plug the headset in and choose the app I want to listen to audio through but the button doesn't respond. However, if I reboot my phone, I regain full functionality for a little while before the problem returns. The issue is not confined to a single set of headphones and the headphones work perfectly in other devices. I believe the issue is related to the Android OS.
I read that it might be an issue with Now cards so I disabled them and I thought I might have solved it. However the problem has persisted.
from xda-developers http://ift.tt/1Lp0Otc
via IFTTT
How to gain mobile hotspot on my rooted unlocke verizon galaxy s5?
Need help. i did it easily with my last lg phone. but i don't see the entitlement check option on this phone.
from xda-developers http://ift.tt/1n9MLfs
via IFTTT
How to install a MM Custom ROM while on KITKAT? (International version)
Day 1, I got my phone I unlocked bootloader and rooted.
I created a backup and tried installing Android Revolution HD 53.1 and it worked, however my WiFi didn't work and boot times would be long, so I uninstalled it and went back to my backup I had made. I read that this happens because my current firmware 1.58.502.1 (4.4.2 KITKAT) is too low (incompatible) to download Android Revolution HD 53.1.
Recently I also bought the sunshine S-off method. So I am currently S-OFF.
ALSO worth noting while I have the international edition of HTC ON M8, I am using T-MOBILE
With S-OFF am I able to go directly to Android Revolution HD 53.1 (which is MM Custom Rom)? If not how do I make my devie compatible with this version?
I would appreciate any help, thank you.
I created a backup and tried installing Android Revolution HD 53.1 and it worked, however my WiFi didn't work and boot times would be long, so I uninstalled it and went back to my backup I had made. I read that this happens because my current firmware 1.58.502.1 (4.4.2 KITKAT) is too low (incompatible) to download Android Revolution HD 53.1.
Recently I also bought the sunshine S-off method. So I am currently S-OFF.
ALSO worth noting while I have the international edition of HTC ON M8, I am using T-MOBILE
With S-OFF am I able to go directly to Android Revolution HD 53.1 (which is MM Custom Rom)? If not how do I make my devie compatible with this version?
I would appreciate any help, thank you.
from xda-developers http://ift.tt/1KWqH3n
via IFTTT
[HELP] L70 dual D325
guys,
i have a l70 dual and he stuck at the pink death screen but i do now how i can fix it
i tried to put in download but i cant, he says
booting reboot, keep pressing vol+
secure boot error
and stuck at the dbi err fatal
i tried to make a reset but the pink screen backs.
i cant buy a box to fix
i tried to boot linux and mount but the folders cant mount is full of errors on my screen and the phone keeps putting the screen on and off, maybe rebooting?
im tired, 17hs of fails in this phone..........
help i have tried evrething i know about android and can't make nothing.
sorry about my english im from brazil.
please help i do now what i do next, i want to kick of the window but i need this phone
i have a l70 dual and he stuck at the pink death screen but i do now how i can fix it
i tried to put in download but i cant, he says
booting reboot, keep pressing vol+
secure boot error
and stuck at the dbi err fatal
i tried to make a reset but the pink screen backs.
i cant buy a box to fix
i tried to boot linux and mount but the folders cant mount is full of errors on my screen and the phone keeps putting the screen on and off, maybe rebooting?
im tired, 17hs of fails in this phone..........
help i have tried evrething i know about android and can't make nothing.
sorry about my english im from brazil.
please help i do now what i do next, i want to kick of the window but i need this phone
from xda-developers http://ift.tt/1n9MGs5
via IFTTT
Need help - when I click any light source photos, they show lines like this
I compared with my friends iphone and he was getting no distorted pics. Click any light source.
Is it normal or should i go to service center?
from xda-developers http://ift.tt/1TgEYem
via IFTTT
Lg G3 blue screen of death?
Hi, my lg g3 is suddenly become "blue screen of death" one day while I was using my phone..everything I boot my phone, it will boot to just a blue screen and nothing else. .
Sometimes it will boot to LG logo and than blue screen..
I flashed 30B a week before , it that helps..
Thanks!
Lg g3, D855, 30B Android 6.0 stock
Sometimes it will boot to LG logo and than blue screen..
I flashed 30B a week before , it that helps..
Thanks!
Lg g3, D855, 30B Android 6.0 stock
from xda-developers http://ift.tt/1TgEWmG
via IFTTT
My wife just received an alert for 6.0...
If we update to marshmallow will she loose root. It's an OTA update
from xda-developers http://ift.tt/1oIgugC
via IFTTT
Dark Spot Across Screen?
Does anyone else have a dark spot across their screen? It really only shows up on a gray or grayish background, but about midway down the screen, there's a band that seems to be a bit darker than the remainder of the screen. Kind of disappointing because AMOLED screens always used to have this issue for me, so I was hoping to escape that with this LCD screen. I'm just wondering if I should try to get it replaced or just keep it. Thanks!
from xda-developers http://ift.tt/1TgEXqG
via IFTTT
Fingerprint screener support?
Does anyone know if Remix has any support for fingerprint scanners?
from xda-developers http://ift.tt/1TgEViD
via IFTTT
S3 neo OTG
I have an s3 neo I9301I running on rom 5.1.1 (s5 mini rom by LGaljo). So after some investigation i found out that i need a kernel that support OTG in order to make it work but i couldn't find anything. Plzzz help
from xda-developers http://ift.tt/1oIgtJD
via IFTTT
Marshmallow SD card access, options?
Hi, so I've been searching with no solution. I'm on a CM13/Android 6.01 rom, SuperSU rooted and using Xposed. ExternalSD is a 128GB Samsung EVO+ and is setup as "portable storage" (Exfat). I am having SD card write access problems since the upgrade to Marshmallow. Titanium can't write to my external SD and then all my non-root apps can't get SD card permission, the most glaring is F-stop's option to allow SD card access in it settings (this is supposed to call the native picker so you can grant access to the SD card) crashes on press. Yet Solid explorer, Apps2SD and all my other root apps besides Titanium seem to have SD card access fine.
So what I am looking for is links/info links on any of the following:
1) Any Xposed/root app that bypasses the SD card restrictions for all apps. Recognized dev Defim is the only one I could fine that is still being maintained but it seems that it doesn't work on Marshmallow.
2) Instructions on how do I manually give external SD card write access to each app individually in CM13.
3) Reaching here but: What binary is used when the picker is called to give external SD card access to an app? I run Xprivacy but to be clear, I have disabled Xprivacy (unchecked the module in Xposed and rebooted) and still had the same problem, but I would like to observe the binary and see what permissions it is using to at least start to troubleshoot this.
4) Any other threads with other options for fixing Android external SD card permissions issues on Marshmallow?
Thanks for any link assist!
So what I am looking for is links/info links on any of the following:
1) Any Xposed/root app that bypasses the SD card restrictions for all apps. Recognized dev Defim is the only one I could fine that is still being maintained but it seems that it doesn't work on Marshmallow.
2) Instructions on how do I manually give external SD card write access to each app individually in CM13.
3) Reaching here but: What binary is used when the picker is called to give external SD card access to an app? I run Xprivacy but to be clear, I have disabled Xprivacy (unchecked the module in Xposed and rebooted) and still had the same problem, but I would like to observe the binary and see what permissions it is using to at least start to troubleshoot this.
4) Any other threads with other options for fixing Android external SD card permissions issues on Marshmallow?
Thanks for any link assist!
from xda-developers http://ift.tt/1TgEV20
via IFTTT
Anyone else ever hit the pause or mute button with their cheek when starting a call?
It seems as if the proximity sensor is too slow to black out the screen and the call is paused or muted by my cheek. Only has happened occasionally but has anyone else noticed it?
from xda-developers http://ift.tt/1oIgvB6
via IFTTT
/\/\/\______How to your ex-boyfriend back +91-9887936284 (whats app )
just solve your all personal problem in your. {+91-9887936284}
own life. you feel that your problem are going to die. {+91-9887936284}
⦁ Love problem solution.
⦁ Husband-wife dispute problem. {+91-9887936284}
⦁ Maha-Vashikaran, kiya karaya, jadu-tona.
⦁ Get back your lost\Hidden ex-Boyfriend\girlfriend. {+91-9887936284}
⦁ To make a bright future in few times in your life.
⦁ Childness problem guernteed solutions.
⦁ Control your lover in your hand by VASHIKARAN. {+91-9887936284}
⦁ Inter-cast love Marriage problem solutions.
⦁ Divorce\marital problem solution. {+91-9887936284}
⦁ whats app +91-9887936284
⦁ Powerful Shubahar Mantra for Wife\Girls.
⦁ Get all solutions in your life within 48 hours and with 100% Guarnteed solution bu astrologic systemetic call to GURU JI and Get Advice frome him.
⦁ To free your all problem contect us at > +91-9887936284 {whats app }
⦁ One call change your life don't west time.
⦁ Love problem is a big problem for couples. In this problem couples are very Sad. and I solve this problemto my Hard-Work. > +91-9887936284 {whats app }
⦁ for more details contect at whats app +91-9887936284,
own life. you feel that your problem are going to die. {+91-9887936284}
⦁ Love problem solution.
⦁ Husband-wife dispute problem. {+91-9887936284}
⦁ Maha-Vashikaran, kiya karaya, jadu-tona.
⦁ Get back your lost\Hidden ex-Boyfriend\girlfriend. {+91-9887936284}
⦁ To make a bright future in few times in your life.
⦁ Childness problem guernteed solutions.
⦁ Control your lover in your hand by VASHIKARAN. {+91-9887936284}
⦁ Inter-cast love Marriage problem solutions.
⦁ Divorce\marital problem solution. {+91-9887936284}
⦁ whats app +91-9887936284
⦁ Powerful Shubahar Mantra for Wife\Girls.
⦁ Get all solutions in your life within 48 hours and with 100% Guarnteed solution bu astrologic systemetic call to GURU JI and Get Advice frome him.
⦁ To free your all problem contect us at > +91-9887936284 {whats app }
⦁ One call change your life don't west time.
⦁ Love problem is a big problem for couples. In this problem couples are very Sad. and I solve this problemto my Hard-Work. > +91-9887936284 {whats app }
⦁ for more details contect at whats app +91-9887936284,
from xda-developers http://ift.tt/1TgETr7
via IFTTT
N9 isn't recognized by Windows 7 pc
Hi, I'm new to the N9, have had the tablet about a week. I have tried connecting it to my windows 7 Pc and the N9 isn't recognized. I have tried all the basics, all drivers are current, set tablet to mtp, and not found. I have connected to a friend's Windows 10 PC and the N9 is found immediately. My N9 is a wifi only device, non rooted. I have 2 other Android devices that my W7 PC finds with no issue. Anyone else experience this, and or have any suggestions on how to fix this issue ? Not looking to root at this point. Any help and guidance would be greatly appreciated
from xda-developers http://ift.tt/1TgEULr
via IFTTT
Any recommendations for a high quality / high performance MicroSD?
My SGS7-Edge arrives tomorrow; it's time to look for a MicroSD!
In the past SGSx phones I've had issues from time to time with MicroSDs where the phone got heated and at times the MicroSD became unreadable (even on a desktop). I had to change 2-3 MicroSDs.
Any recommendation for a high performance / quality and reliability card?
Thanks.
In the past SGSx phones I've had issues from time to time with MicroSDs where the phone got heated and at times the MicroSD became unreadable (even on a desktop). I had to change 2-3 MicroSDs.
Any recommendation for a high performance / quality and reliability card?
Thanks.
from xda-developers http://ift.tt/1oIgvkM
via IFTTT
Xposed modules not working
Xposed is loading modules from mnt/asec, not sure if that's the correct location but that's the only info I have. I have the following error saying file does not exist when the modules load. Any way to fix this? Sorry don't have much info. Thanks in advance 👍
from xda-developers http://ift.tt/1oIgv4c
via IFTTT
Registry Keys for VoLTE enable?
I've been doing some poking around with Win10M on my 830 and want to enable VoLTE so that I can place VoLTE calls on T-Mobile.
I have an RM985 device, so I get access to T-mobile LTE, but don't have all AWS bands so in LTE only areas (Becoming more common) I cannot place calls.
I found Microsoft's documentation for VoLTE & IMS settings, but cannot figure out where in the registry these are. Can someone help me figure out where to write to so that I can toggle my VoLTE settings?
http://ift.tt/1uC2S32
and http://ift.tt/1uC2S32
Anyone have any information?
I have an RM985 device, so I get access to T-mobile LTE, but don't have all AWS bands so in LTE only areas (Becoming more common) I cannot place calls.
I found Microsoft's documentation for VoLTE & IMS settings, but cannot figure out where in the registry these are. Can someone help me figure out where to write to so that I can toggle my VoLTE settings?
http://ift.tt/1uC2S32
and http://ift.tt/1uC2S32
Anyone have any information?
from xda-developers http://ift.tt/1TgETav
via IFTTT
Cheap Kitchens Birmingham
Cheap Kitchens Birmingham. Thirty Ex Display Kitchens To Clear. we wee we exdisplaykitchens1 c0o uk £ 595 Each with appliances. Tel 01616-694786
from xda-developers http://ift.tt/1TgwbsV
via IFTTT
[APP] Radio FM Mod: Next/Prev Favorite in notification bar
This app changes the behavior of the Fm-Radio widget so that next/previous buttons choose next or previous radio channel from your favorite list.
ONLY FOR KITKAT!!
How to install (need root)
- Download the APK at the end of the post
- Backup the files radio3.apk and radio3.odex from system/app
- With a root explorer place the modded radio3.apk in system/app and set the permisions to rw-r-r
- Delete radio3.odex if exists
- Reboot
How to restore original
- Delete radio3.apk from system/app and put the original files radio3.apk and radio3.odex with permisions rw-r-r
-Reboot
How to make your own
Check these posts:
http://ift.tt/1Tgw9Bg
http://ift.tt/1Tgw9Bi
ONLY FOR KITKAT!!
How to install (need root)
- Download the APK at the end of the post
- Backup the files radio3.apk and radio3.odex from system/app
- With a root explorer place the modded radio3.apk in system/app and set the permisions to rw-r-r
- Delete radio3.odex if exists
- Reboot
How to restore original
- Delete radio3.apk from system/app and put the original files radio3.apk and radio3.odex with permisions rw-r-r
-Reboot
How to make your own
Check these posts:
http://ift.tt/1Tgw9Bg
http://ift.tt/1Tgw9Bi
from xda-developers http://ift.tt/1n9wkjk
via IFTTT
Root Asus Zenpad 10' (Z300c)
I'm looking to root my new Zenpad.
I'm just wondering if there's any confirmed way to do this yet?
I've done some searching and read somewhere that Kingo will do it(Not too sure about that, if I do try that method, what's the risk of brick?)
There's also a method that requires adb, but it'll only boot successfully once.
I've also found a Russian forum that claims to have successfully rooted.. but I can't make sense of the instructions.
http://ift.tt/1n9wkje (Russian link)
Would anyone be able to assist?
I'm just wondering if there's any confirmed way to do this yet?
I've done some searching and read somewhere that Kingo will do it(Not too sure about that, if I do try that method, what's the risk of brick?)
There's also a method that requires adb, but it'll only boot successfully once.
I've also found a Russian forum that claims to have successfully rooted.. but I can't make sense of the instructions.
http://ift.tt/1n9wkje (Russian link)
Would anyone be able to assist?
from xda-developers http://ift.tt/1Tgw9Be
via IFTTT
Will the VZW G5 be rooted and/or BL unlocked?
I sure hope so. I can't have a phone without root. Unfortunately I'm stuck with verizon....
Sent from Tapatalk
Sent from Tapatalk
from xda-developers http://ift.tt/1n9wkja
via IFTTT
LG G4 goes black screen and freezes after taking pictures
Hello,
My LG G4 sometimes goes black screen just after taking a picture. It does not respond to any button press and if it is playing any music it just stops.
In order to turn it on again I have to remove the battery.
Is there any hardware issue related to this? Seems like I'm doomed to this, my former Nexus 4 used to do it also.
My LG G4 sometimes goes black screen just after taking a picture. It does not respond to any button press and if it is playing any music it just stops.
In order to turn it on again I have to remove the battery.
Is there any hardware issue related to this? Seems like I'm doomed to this, my former Nexus 4 used to do it also.
from xda-developers http://ift.tt/1TgwbsP
via IFTTT
Caller ID options
I know this could be viewed as an app thread q, but still.
I liked my g3 as it could run roms that had baked in caller id. Besides the mr number style apps, and paying 3 a month for caller name id, what options are out there?
Thanks!
Sent from my VS986 using Tapatalk
I liked my g3 as it could run roms that had baked in caller id. Besides the mr number style apps, and paying 3 a month for caller name id, what options are out there?
Thanks!
Sent from my VS986 using Tapatalk
from xda-developers http://ift.tt/1n9wkj8
via IFTTT
Question regarding kernel patcing/updates
I kind of feel as if this should be a very basic topic and that I should not be having to post a new thread on it... but, out of curiosity, does anyone know whether or not the Android kernel-- which as we all know is a flavour of the Linux kernel-- can be updated through "patching" as the regular Linux kernel can? The reason I am asking is that I greatly prefer to run my device with a custom kernel that has extra features over the stock kernel, however, it seems like every custom kernel that is released is released as a one-shot deal, and that the only way to have a kernel that continues to be updated with fresh source is to run the kernels that are provided with the nightly ROM builds.
Of course, I could go the route of learning how to build my own kernels and add features to them.. but I guess my basic question is, does there exist any form of "general patch" that is periodically released by Google, or the Linux Kernel foundation, etc., that will bring your current kernel up-to-date with the latest system-wide changes (secuturity & stability fixes, etc), while leaving the bulk of the kernel and the kernel configuration in place? Or is that a totally unrealistic and impractical concept? I do build my own kernels from source for my laptop, but I know very little about compiling a kernel for android.. anyway, if there are any kernel devs still on this device's forum, what do you guys think?
Any feedback from knowledgeable individuals much appreciated.. thank you! :)
Of course, I could go the route of learning how to build my own kernels and add features to them.. but I guess my basic question is, does there exist any form of "general patch" that is periodically released by Google, or the Linux Kernel foundation, etc., that will bring your current kernel up-to-date with the latest system-wide changes (secuturity & stability fixes, etc), while leaving the bulk of the kernel and the kernel configuration in place? Or is that a totally unrealistic and impractical concept? I do build my own kernels from source for my laptop, but I know very little about compiling a kernel for android.. anyway, if there are any kernel devs still on this device's forum, what do you guys think?
Any feedback from knowledgeable individuals much appreciated.. thank you! :)
from xda-developers http://ift.tt/21u78Hh
via IFTTT
Temp Root Question
Sorry if this question does not belong here, I'm a noob. A few days ago I was trying some things with the sunshine free apk and after a few minutes I got a message that said "congratulations now you have temp root", then I installed TWRP through google play, rebooted into recovery and it worked. At that time I did not try to install a Custom Rom through this method because I wasn't sure about it, my question is Can I install a custom rom doing with this method? (like the google play edition sensified rom)
from xda-developers http://ift.tt/1RysevZ
via IFTTT
SM-G9208 TW Marshmallow (Wait or force flash SM-G920F firmware?)
I just purchased an S6 with Model #: SM-G9208, at first I thought it came from China and what not but it came out from TW because it has Google Play Store.
Will Samsung release the Marshmallow update for the device or is there any possible way that I can just flash the SM-G920F Firmware?
I can't seem to find any reliable source about this concern and the BRI firmware has battery drain bug.:(
Will Samsung release the Marshmallow update for the device or is there any possible way that I can just flash the SM-G920F Firmware?
I can't seem to find any reliable source about this concern and the BRI firmware has battery drain bug.:(
from xda-developers http://ift.tt/21u736m
via IFTTT
"Footer is wrong" error after updating to 5.0 - can't flash
I just decided to upgrade my Note 3 (N9005) from 4.4.2 to Lollipop - I was holding off until Xposed for TW seemed nice and stable - and used this guide to do it. The intention was to go up to 5.0 and then put on a custom 5.1 rom on with xposed.
Since putting 5.0 on, however, I appear to be able to flash almost nothing - everything comes up with the...
"Finding update package...
Verifying update package...
E: footer is wrong
E: footer is wrong
E: signature verification failed
Installation aborted"
...error, then reboots. I tried changing from CWM to TWRP, and discovered that anything which uses the Aroma installer won't run either - it starts then quits back to TWRP. I tried a whole bunch of other update threads but ended up with a device that wouldn't boot.
At this point I decided to push the 5.0 ROM from Sammobile back on via Odin and try to start afresh. My device is currently working with 5.0 (and CWM) on it but I still cannot flash anything - with the one exception of arter97's kernel, which flashes fine!!!
I'm stumped. I've read various threads about the "Footer is wrong" error and am none the wiser. It cannot be the files, I've pulled a number of them numerous times (various machines too) and checked the hashes and they're all good, but I can't fined anything conclusive to give me a way forward.
Can anyone suggest a next step? Please?
Since putting 5.0 on, however, I appear to be able to flash almost nothing - everything comes up with the...
"Finding update package...
Verifying update package...
E: footer is wrong
E: footer is wrong
E: signature verification failed
Installation aborted"
...error, then reboots. I tried changing from CWM to TWRP, and discovered that anything which uses the Aroma installer won't run either - it starts then quits back to TWRP. I tried a whole bunch of other update threads but ended up with a device that wouldn't boot.
At this point I decided to push the 5.0 ROM from Sammobile back on via Odin and try to start afresh. My device is currently working with 5.0 (and CWM) on it but I still cannot flash anything - with the one exception of arter97's kernel, which flashes fine!!!
I'm stumped. I've read various threads about the "Footer is wrong" error and am none the wiser. It cannot be the files, I've pulled a number of them numerous times (various machines too) and checked the hashes and they're all good, but I can't fined anything conclusive to give me a way forward.
Can anyone suggest a next step? Please?
from xda-developers http://ift.tt/1Rysdbe
via IFTTT
Xui Infinix ROM FOR HOT 2
Xui Infinix ROM FOR HOT 2 :D :D
Im jUST sharing the rom ...
ROM feature:
Fast Charger
Support Theme Xui
Battery Saver
Smooth
NO DELAY (Tested ME)
*
*
LINK BLOG ENTRY FOR DOWNLOND LINK AND Screenshots : http://ift.tt/21u73mO
*
*
Installation Method:
1. Should've installed TWRP
2. Download and store materials outside agara folder makes it easy for flashing
3. Turn off mobile phones and go into Recovery mode by pressing the Volume up + power simultaneously
4. If you have entered TWRP directly click and select the advanced wipe Wipe
5. Then Choose or Checklist System - Data - Dalvik cache - cache then okay or slide to the right.
6. after returning from Wipe to the start screen and select Install TWRP And Locate the ROM file its last execution.
7. Wait until the process Flashing Done.
8. If it Done proceed to install the FIX-Xui her in the same way.
9. After all the process is completed followed to Install root.zip
10.Lalu if completed all clicks reboot.
*
*
Congratulations Successfully Installs Xui ROM.
*
*
* NOTE *
Try Backup and Backup Imei Rom.
*
*
THANKS TO:
THE Developer : Yhogi Hermawanz :good:
All Members Infinix Hot 2
Agung Nugraha Wildfire
ANDROBUDDIES TEAM
XDA
Im jUST sharing the rom ...
ROM feature:
Fast Charger
Support Theme Xui
Battery Saver
Smooth
NO DELAY (Tested ME)
*
*
LINK BLOG ENTRY FOR DOWNLOND LINK AND Screenshots : http://ift.tt/21u73mO
*
*
Installation Method:
1. Should've installed TWRP
2. Download and store materials outside agara folder makes it easy for flashing
3. Turn off mobile phones and go into Recovery mode by pressing the Volume up + power simultaneously
4. If you have entered TWRP directly click and select the advanced wipe Wipe
5. Then Choose or Checklist System - Data - Dalvik cache - cache then okay or slide to the right.
6. after returning from Wipe to the start screen and select Install TWRP And Locate the ROM file its last execution.
7. Wait until the process Flashing Done.
8. If it Done proceed to install the FIX-Xui her in the same way.
9. After all the process is completed followed to Install root.zip
10.Lalu if completed all clicks reboot.
*
*
Congratulations Successfully Installs Xui ROM.
*
*
* NOTE *
Try Backup and Backup Imei Rom.
*
*
THANKS TO:
THE Developer : Yhogi Hermawanz :good:
All Members Infinix Hot 2
Agung Nugraha Wildfire
ANDROBUDDIES TEAM
XDA
from xda-developers http://ift.tt/1Rysb3b
via IFTTT
Can aspx-based sites function properly on smartphones?
I ask this because the site I have to be able to visit and function 24/7 is aspx-based. Here is some details to understand my issue.
The site is an affiliate-type one and I transfer money from once bank account to users, and I have to do it, when they ask it.
So, it's not a big deal for me to do that, when I'm at my workplace or my home, but I have life and I cannot be 16 hours a day at home. When I tried to access the website from my smartphone (TCL 5042D) using Chrome and Firefox and Browser (phone's own browser)(I encountered the same problem at the same spot from all 3 of them-I'll explain the problem right now), I logged in just fine. The customer's accounts are in one page and from there simply press the + or - buttons (depends on what the customer wants) and then a popup will appear, having a 2 boxes that I have to write the amount of money and a description for the transaction. As soon as I press to the boxes, the smartphone zooms as it supposed to be (in order to see what you're typing) and the popup disappears from the screen disabling me to press the ok and to put description.
What, do you believe? Could it be a bad-written aspx site, or is it natural to react that way? And what do you suggest?
(English is not my mother language, and if you find any difficulty to comprehend the text above, post to the thread your question, in order to clarify what you didn't understand)
The site is an affiliate-type one and I transfer money from once bank account to users, and I have to do it, when they ask it.
So, it's not a big deal for me to do that, when I'm at my workplace or my home, but I have life and I cannot be 16 hours a day at home. When I tried to access the website from my smartphone (TCL 5042D) using Chrome and Firefox and Browser (phone's own browser)(I encountered the same problem at the same spot from all 3 of them-I'll explain the problem right now), I logged in just fine. The customer's accounts are in one page and from there simply press the + or - buttons (depends on what the customer wants) and then a popup will appear, having a 2 boxes that I have to write the amount of money and a description for the transaction. As soon as I press to the boxes, the smartphone zooms as it supposed to be (in order to see what you're typing) and the popup disappears from the screen disabling me to press the ok and to put description.
What, do you believe? Could it be a bad-written aspx site, or is it natural to react that way? And what do you suggest?
(English is not my mother language, and if you find any difficulty to comprehend the text above, post to the thread your question, in order to clarify what you didn't understand)
from xda-developers http://ift.tt/1oI8X1d
via IFTTT
Spontaneously soft restarting
Today, my phone has been soft restarting without warning. It'll be going along happily, and then the Sprint splash screen will pop up, and ten it'll load the OS and all that nonsense. It's annoying. How do I begin to troubleshoot this? Full disclosure: I've got the systemless root and the Xposed framework. And I've got charging issues. It charges very slowly and doesn't like its original HTC charger anymore. I tried the recallibrate trick — hold down power, vol+, and vol- for 2 minutes — and it reset a bunch of my programs and settings, and created this soft reboot problem. So it's a mess. But can I fix this one thing at least?
It did it super frequently earlier. It's doing it less and less now, but has not stopped all together to my knowledge. Will it go away on its own? I'd feel better if I knew what to do if and when it comes back.
It did it super frequently earlier. It's doing it less and less now, but has not stopped all together to my knowledge. Will it go away on its own? I'd feel better if I knew what to do if and when it comes back.
from xda-developers http://ift.tt/24w450b
via IFTTT
Notification Bar - Not Showing Any Music Player Controls.
So when I rooted my device (Amazon Fire HD 8), I turned off a batch of Amazon services that I don't really need. It was the
"List of Amazon apps that are okay to remove" - http://ift.tt/24w4508
Then I went to play my Music Player, and when I got out the app (music is still playing in the background). I went to look in the notification bar and did't see any music control for that Music Player app. Such as in backward, pause, forward etc.
I am looking for any one to help me with this. So please help!!
"List of Amazon apps that are okay to remove" - http://ift.tt/24w4508
Then I went to play my Music Player, and when I got out the app (music is still playing in the background). I went to look in the notification bar and did't see any music control for that Music Player app. Such as in backward, pause, forward etc.
I am looking for any one to help me with this. So please help!!
from xda-developers http://ift.tt/1oI8X1b
via IFTTT
CM11 or OmniRom 6.0.1 ?
Hello!
i was using CM Rom for 2 years , but sadly the CM's team stoped upgrading the rom for Cm12 , so i searched for another rom , i found the OmniRom , flashed it nd used for 3 months it's a good looking rom , clean , and fast , but i should keep the cpu on (max 1400 ,min 400) and that makes the phone too hot while charge and drain the battery fast .
so should i back to CM11 , or could anyone help me to slove this proplem ?!
i was using CM Rom for 2 years , but sadly the CM's team stoped upgrading the rom for Cm12 , so i searched for another rom , i found the OmniRom , flashed it nd used for 3 months it's a good looking rom , clean , and fast , but i should keep the cpu on (max 1400 ,min 400) and that makes the phone too hot while charge and drain the battery fast .
so should i back to CM11 , or could anyone help me to slove this proplem ?!
from xda-developers http://ift.tt/24w4506
via IFTTT
Slow charging
Hey guys,
I have just bought a used Note 4, I upgraded from Note 3 and I am facing an issue while charging it, I'm using fast charging and it goes fast from 0 to about 70% in approximately an hour, but after that, it takes forever to reach 100% maybe two extra hours, I tried calibrating the battery but it didn't work. I noticed that it sometimes gets stucked for a while at 85+ and when I take off the battery and put it in again, the phone becomes fully charged.
And also my battery only offers me 2h30 or 3h max SOT which is very poor compared to the Note 3 I used to have.
Should I replace the battery or what is the problem? :confused:
Thank you.
I have just bought a used Note 4, I upgraded from Note 3 and I am facing an issue while charging it, I'm using fast charging and it goes fast from 0 to about 70% in approximately an hour, but after that, it takes forever to reach 100% maybe two extra hours, I tried calibrating the battery but it didn't work. I noticed that it sometimes gets stucked for a while at 85+ and when I take off the battery and put it in again, the phone becomes fully charged.
And also my battery only offers me 2h30 or 3h max SOT which is very poor compared to the Note 3 I used to have.
Should I replace the battery or what is the problem? :confused:
Thank you.
from xda-developers http://ift.tt/1oI8YSX
via IFTTT
Kodi????
any help here would be great......upgraded to 3.0 everything is running good, installed twrp, rooted, the only issue that's driving me mad is that I installed kodi 16(latest) and when trying to add file source like fusion I get unable to connect couldn't retrieve directory information, this could be due to the network not being connected?????? wtf network is connected...back to nvidia to check where kodi is with it's data....
from xda-developers http://ift.tt/24w44sU
via IFTTT
Ringke cases for Galaxy S7
http://ift.tt/24w44cE
Found these available on amazon. Always loved there cases for my nexus 5x and galaxy s6.
Found these available on amazon. Always loved there cases for my nexus 5x and galaxy s6.
from xda-developers http://ift.tt/1oI8YSV
via IFTTT
Apps on SD Card?
So I'm new to this whole SD card thing, I've only owned the s6, which obviously, didn't support expandable storage. So my question is - is it possible to move apps onto the SD card slot? I understand there might be a performance hit, but for a lot of apps, I can careless about the performance of the storage on it.
I saw there was a "move to sd card" option for applications on the galaxy s5 - will there be something similar here?
I saw there was a "move to sd card" option for applications on the galaxy s5 - will there be something similar here?
from xda-developers http://ift.tt/1KW6OJU
via IFTTT
Still a good choice in 2016?
Been using the moto x 2013 for some time now and its just about perfect. I dont game, my use is heavy on web, text. The problem with my X is that the microphone doesnt seem to work anymore, I have to carry a wired or bluetooth to talk on the phone...which is a pain.
I want something small, similar in size, to replace it. Ive narrowed it down to a S4 or LG G2. Which would you guys recommend? Anyone else make a move from the X 2013 to one of these models?
Thanks,
Mario
I want something small, similar in size, to replace it. Ive narrowed it down to a S4 or LG G2. Which would you guys recommend? Anyone else make a move from the X 2013 to one of these models?
Thanks,
Mario
from xda-developers http://ift.tt/1VM95I2
via IFTTT
Lockscreen problem
Every time i lock my device, when I try to unlock, the screen goes black, and after 1-2 minutes, SystemUI restarts. This issue started after I tried to change SELinux to Permissive, using SELinux mode changer, but even after I returned to original value and uninstalled the app, I can't lock my phone anymore. How I can fix this? I'm on KitKat 2.22.40.54
from xda-developers http://ift.tt/1TJ0CWX
via IFTTT
Theme store port for touchwiz 5.1.1
The True Theme Store For TouchWiz 5.1.1 ROMS Coming Soon.....
THEMES Collection , Theme for the Samsung Galaxy S 4/5 all devices with THEME STORE (porting included) S6/EDGE/EDGE+NOTE-3/4/5
THEMES Collection , Theme for the Samsung Galaxy S 4/5 all devices with THEME STORE (porting included) S6/EDGE/EDGE+NOTE-3/4/5
Description
Would like to inform to you this guys - the actual theme store have been ported for many devices such as S4 and Note 5 and soon possible that would be available for our device
I and many other people have done previous attempts to get the actual theme store working on TouchWiz 5.1.1 ROM but it have failed - Earlier gave a Not available in country error and after Removing that my some means and installing a theme from the official theme store gave a Bootloop
Guess What? I have made a request to the person who made the actual theme store working and succeeded to get his attention and he is ready to help
The other thing now is HE NEED U GUYS HELP! SO ARE YOU READY TO HELP HIM?
The thing is, I am right now in class 12th and my Exams are going to start from tomorrow, I am available at XDA only during my short breaks:)
And for this the DEVs will require information, source and telling them the status ASAP which I can't right now, SO WOULD REQUEST YOU GUYS TO HELP HIM
Link to the actual thread
http://ift.tt/1TJ0FlD
ScreenShots
Some screenshots of the theme store and a sample example of the theme are provided in attachment
Contributors of the theme store
@Ufo71, cristiandior, Shelton @kintarooee @Nulcis98 @ManuelSepe99 @KevinHannibal @Craftivan99
@vel7wil @ted77usa
The dev who have actually seen my request at the time - @Ufo71
The person who requested -Me @sumitgupta06
Version Information of this one
Status: Unstable(Previous Attempts Gave Bootloop)
Current Stable Version: None
ROM OS Version: Lollipop
Based On: TouchWiz
Version Information of the one made by the devs for other devices
Status: Stable
Current Stable Version: ALL
Stable Release Date: 2016-02-14
Current Beta Version: 22/12/2015
Beta Release Date: 2015-02-09
Created 2016-02-14
Last Updated 2016-02-25
Request
So At last I would request to all of the TouchWiz 5.1.1 Lollipop users to LIKE, COMMENT, SHARE, HELP for this awesome Mode
Plz help the Actual Devs as I won't be available
If you find this information/request acceptfull, useful and satisfying, Please give a thank and share this:)
from xda-developers http://ift.tt/214NxHU
via IFTTT
Having issues with Facebook..
Is anyone else having problems with fb loading it just loads to a white screen..
I'm not rooted yet fully stock and have deleted the app a few times..
Sent from my KIW-L24 using Tapatalk
I'm not rooted yet fully stock and have deleted the app a few times..
Sent from my KIW-L24 using Tapatalk
from xda-developers http://ift.tt/1TJ0Flt
via IFTTT
Marshmallow Bootloader doesn't flash
I tried to flash marshmallow bootloader on my phone to install android marshmallow, but I can't. It says "NAND write start. FAIL". Any ideas?
from xda-developers http://ift.tt/214NwDY
via IFTTT
Asus Fonepad 7 for call use in the United States?
I'm wanting to use a tablet/phone hybrid. I don't want to carry two devices. I've already got a note 4 and still want more. Are any of you able to use this in the United states for phone service? If so which carrier? I've asked around to all the major ones and can't get a definitive answer from anyone.
from xda-developers http://ift.tt/1TJ0F4U
via IFTTT
Possible battery drain introduced in the February security patch?
So a lot of people and myself over on the Nexus 6P subreddit have been discussing about the possibility of some sort of battery drain with the arrival of the Feb patch. On any ROM/kernel combination (and even on stock at some point), my phone very easily reaches 4:45-5:00 of screen time throughout a day that is from 7am-10pm for me. Over the last month, it has progressively gotten worse, on some days reaching low levels with just 3:30 SoT. After using various ROMs, I decided to try out bone stock to see if I would get the same result (this was 3 days ago). And that has been the case... The phone barely reaches 4 hours of screen time.
Well you might suggest: "Disable services such as location and sync" or "What apps have you recently installed that could be causing drains?" And that's the thing. My usage patterns have not changed at all. I barely download new apps and always stick to using the same ones. Today my location was off for a very long time and I've still gotten the same battery. I've been keeping my eye on the awake bar on battery info, and the phone sleeps as it should, so I'm sure there aren't any rogue apps.
Well you might suggest: "Disable services such as location and sync" or "What apps have you recently installed that could be causing drains?" And that's the thing. My usage patterns have not changed at all. I barely download new apps and always stick to using the same ones. Today my location was off for a very long time and I've still gotten the same battery. I've been keeping my eye on the awake bar on battery info, and the phone sleeps as it should, so I'm sure there aren't any rogue apps.
from xda-developers http://ift.tt/214Nufo
via IFTTT
[GUIDE] How to Decompile APKs with ODEX files [Noob Friendly]
When you have an system app with an odex file like bluetooth.apk and bluetooth.odex you can't use apktool for decompile and there is no need to deodex the whole ROM, follow this guide to decompile and mod one of these apps and nothing else.
NEED
- Be root
- Fastboot folder
- Files: baksmali.jar, smali.jar and zipalign.exe
Skip all this by downloading this folder
- Make a folder named "Baksmali" and place these files: baksmali.jar, smali.jar, zipaling.exe, the apk and her odex file
- Place the fastboot folder in C:/Baksmali and rename it to framework
- Make sure the files are named baksmali.jar and smali.jar for simplicity, not baksmali-somenumber.jar
DECOMPILE
- Conect your device to the PC
- Go to Backsmali/framework
- Right click + SHIFT on an empty space of the folder and select "open command window here" and input this command:
adb pull /system/framework
- Go to Baksmali folder
- Right click + SHIFT on an empty space of the folder and select "open command window here" and input this command (replace NAME with the name of your odex file):
java -jar baksmali.jar -d framework -x NAME.odex
- The files should be in the "out" folder now created
COMPILE
This way you can create a classes.dex file to later put in an apk so the apk is not more dependent of the odex file
- Again in Baksmali folder Right click + SHIFT and select "open command window here". Input
java -jar smali.jar -o classes.dex out
Now open the APK file with 7zip/winrar and drag the file classes.dex, confirm and exit.
Input this command:
zipalign -v 4 apk.apk new_apk.apk
apk: name of the apk we just added classes.dex file
new_apk: apk generated by zipaling, ready to use in the device
PLACE APP IN THE DEVICE
Rename the new_apk to the original name, and with a root explorer place it in system/app with permisions rw-r-r, remember deleting the odex file in that folder.
If when you open the app crashes always try rebooting
NEED
- Be root
- Fastboot folder
- Files: baksmali.jar, smali.jar and zipalign.exe
Skip all this by downloading this folder
- Make a folder named "Baksmali" and place these files: baksmali.jar, smali.jar, zipaling.exe, the apk and her odex file
- Place the fastboot folder in C:/Baksmali and rename it to framework
- Make sure the files are named baksmali.jar and smali.jar for simplicity, not baksmali-somenumber.jar
DECOMPILE
- Conect your device to the PC
- Go to Backsmali/framework
- Right click + SHIFT on an empty space of the folder and select "open command window here" and input this command:
adb pull /system/framework
- Go to Baksmali folder
- Right click + SHIFT on an empty space of the folder and select "open command window here" and input this command (replace NAME with the name of your odex file):
java -jar baksmali.jar -d framework -x NAME.odex
- The files should be in the "out" folder now created
COMPILE
This way you can create a classes.dex file to later put in an apk so the apk is not more dependent of the odex file
- Again in Baksmali folder Right click + SHIFT and select "open command window here". Input
java -jar smali.jar -o classes.dex out
Now open the APK file with 7zip/winrar and drag the file classes.dex, confirm and exit.
Input this command:
zipalign -v 4 apk.apk new_apk.apk
apk: name of the apk we just added classes.dex file
new_apk: apk generated by zipaling, ready to use in the device
PLACE APP IN THE DEVICE
Rename the new_apk to the original name, and with a root explorer place it in system/app with permisions rw-r-r, remember deleting the odex file in that folder.
If when you open the app crashes always try rebooting
from xda-developers http://ift.tt/1XTRQG7
via IFTTT
[APP][XPOSED] Inspeckage - Android Package Inspector
Introduction
Inspeckage is a tool developed to offer dynamic analysis of Android applications. With this tool we can better understand what an Android application is doing at runtime.
How it works?
It is a simply application (apk) with an internal HTTP server providing a friendly web interface.
Features
Information gathering
Hooks (until now)
With the hooks, we can see what the application is doing in real time.
Actions
With the Xposed is possible do some actions like start a not exported activity!
Extras
Configuration
Even with some hooks at HTTP libraries, using an external proxy tool it is still the best alternative to analyze the traffic.
Requirements
Download
http://ift.tt/1SaZV8X
Source Code
http://ift.tt/1XTRPlu
Screenshots
Tab Screenshot
Reporting bugs
For bug reports and feature requests, please post them in the GitHub Issues page.
Genymotion
I made a small tutorial on how to get it ready for Inspeckage.
http://ift.tt/1SaZWcY
XDA:DevDB Information
Inspeckage, Xposed for all devices (see above for details)
Contributors
acarlosmartins
Source Code: http://ift.tt/1XTRPlu
Xposed Package Name: mobi.acpm.inspeckage
Version Information
Status: Beta
Current Beta Version: 1.0
Created 2016-02-29
Last Updated 2016-02-28
Inspeckage is a tool developed to offer dynamic analysis of Android applications. With this tool we can better understand what an Android application is doing at runtime.
How it works?
It is a simply application (apk) with an internal HTTP server providing a friendly web interface.
Features
Information gathering
- Requested Permissions
- App Permissions
- Shared Libraries
- Exported Activities and Non Exported Activities
- Exported Content Provider and Non Exported Content Provider
- Exported Services and Non Exported Services
- Exported Broadcast Receiver and Non Exported Broadcast Receiver
- If is Debuggable
- Version, UID and GIDs
- etc
Hooks (until now)
With the hooks, we can see what the application is doing in real time.
- Shared Preferences (log and file)
- Serialization
- Crypto
- Hash
- SQLite
- HTTP (a http proxy tool it is still the best alternative)
- File System
- Miscellaneous (Clipboard, URL.Parse())
- WebView
- IPC
Actions
With the Xposed is possible do some actions like start a not exported activity!
- Start any activity (exported and non exported)
- Calling any provider (exported and non exported)
- Disable FLAG_SECURE
- SSL uncheck
- Start, close and restart the application
Extras
- APK Download
- View the app's directory tree
- Download the app files
- Download the output generated by hooks in text file format
- Printscreen
Configuration
Even with some hooks at HTTP libraries, using an external proxy tool it is still the best alternative to analyze the traffic.
- Add a proxy to the target app
- Enable and disable proxy
- Add entries in the arp table
Requirements
- Xposed Framework
Download
http://ift.tt/1SaZV8X
Source Code
http://ift.tt/1XTRPlu
Screenshots
Tab Screenshot
Reporting bugs
For bug reports and feature requests, please post them in the GitHub Issues page.
Genymotion
I made a small tutorial on how to get it ready for Inspeckage.
http://ift.tt/1SaZWcY
XDA:DevDB Information
Inspeckage, Xposed for all devices (see above for details)
Contributors
acarlosmartins
Source Code: http://ift.tt/1XTRPlu
Xposed Package Name: mobi.acpm.inspeckage
Version Information
Status: Beta
Current Beta Version: 1.0
Created 2016-02-29
Last Updated 2016-02-28
from xda-developers http://ift.tt/1SaZWd0
via IFTTT
Debrand ATT Lumia 950
Just wondering Is there a generic flash file I can use to put on my phone. I am getting tired of having to wait for ATT to release firmware updates from Microsoft. They have released a ton and ATT still hasn't released any of them. Also If my phone is not unlocked, will flashing unlock it.
Thanks :)
Thanks :)
from xda-developers http://ift.tt/1XTRM9s
via IFTTT
samedi 27 février 2016
Data toggle on wifi connect/disconnect on MM
Hello i have a problem, on LL i have a tasker profile wich toggle data on wifi connect/disconnect, but on MM i tried tasker and several options (macrodroid, securesettings, etc) with no results (i guess the reason is about MM permissions)
Anyone have the same problem and how resolved? :)
Thanks
Anyone have the same problem and how resolved? :)
Thanks
from xda-developers http://ift.tt/1n6tX0y
via IFTTT
Sd card partition not detecting
please help i partioned my sd-card as first partition as primary fat32 partition and second as ext2/3/4 for multiboot, but some rom cm13 based and cm12.1 custom rom saying sd card corrpted and fomat again to delete partition what is problem, please help
while recovery detect sd card
while recovery detect sd card
from xda-developers http://ift.tt/1QkR4Ar
via IFTTT
mobile data doesn't work
when i enable my mobile data nothing happen and my access point for service right ! and my sim work good on anther phone ? my rom LP stock any idea ?
from xda-developers http://ift.tt/1VL6o9D
via IFTTT
B329 to B511 - Stuck in BootLoop
Hi All,
I accidentally tried updating my stock/unrooted MT7-L09 from B329 to B511, and now its stuck in a boot loop :S Any help fixing this mess would really be appricated!
Thanks,
-JVWARD
I accidentally tried updating my stock/unrooted MT7-L09 from B329 to B511, and now its stuck in a boot loop :S Any help fixing this mess would really be appricated!
Thanks,
-JVWARD
from xda-developers http://ift.tt/1QkR1EJ
via IFTTT
ZenFone 2 and FastBoot on Linux
After month of searching to find a way to use fastboot on Linux Mint for my ZE551ML, Minimal_adb_fastboot from GitHub work.
http://ift.tt/14qos4c
note: I use software manager to remove ADB and FastBoot.
After uncompress Minimal_adb_fastboot,
I double click on install.sh and click on run in terminal => he voila it work!
To test types in terminal
sudo adb reboot bootloader
sudo fastboot devices
Please do not replay with thanks, use the thanks button instead.
http://ift.tt/14qos4c
note: I use software manager to remove ADB and FastBoot.
After uncompress Minimal_adb_fastboot,
I double click on install.sh and click on run in terminal => he voila it work!
To test types in terminal
sudo adb reboot bootloader
sudo fastboot devices
Please do not replay with thanks, use the thanks button instead.
from xda-developers http://ift.tt/1QkR3wf
via IFTTT
Xperia Z5 lack of Developments?
sorry for the nooby question, but everytime i check xperia z5's Android development page, there's nothing new. no custom roms, few custom recovery, and few kernel. is it because Z5 is hard to make a custom rom? or because of no developer uses xperia z5? sorry for my bad english.:eek:
from xda-developers http://ift.tt/1VL6q1f
via IFTTT
I need a g4 stock gallery zip
Please i need it the g4 stock gallery zip for flash into recuvery or flashfire
Enviado desde mi VS986 mediante Tapatalk
Enviado desde mi VS986 mediante Tapatalk
from xda-developers http://ift.tt/1LMMyoM
via IFTTT
V810 Bricked - ADB unauthorized - sideload only
So I thought TWRP was not right for CM so as a dumbass I got a cm-12.1-20160228-NIGHTLY-v500-recovery.img
Wiped the device completely and executed:
dd if=/sdcard/cm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Now, all I can do is boot to CM recovery.
Please HELP!!!!
Wiped the device completely and executed:
dd if=/sdcard/cm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Now, all I can do is boot to CM recovery.
- Adb is unauthorized so can't push pull or adb shell
- Cant load bootloader (just stuck on LG)
- LG Mobile Tool won't recognize ****
- From CM recovery, the system cant mount anything...
- Only Apply Update from ADB, takes adb to sideload mode
- Tried to sideload anything, it wont work as system cant mount anything.
Please HELP!!!!
from xda-developers http://ift.tt/1TGJHo3
via IFTTT
I need help HTC a9 won't mount data
How do i mount data on 3.0 twrp I having trouble rooting it I'm stuck. Can you explain step by step on how to mount data
Sent from my SM-N900T using Tapatalk
Sent from my SM-N900T using Tapatalk
from xda-developers http://ift.tt/1LMMyoK
via IFTTT
display always on?
I know this is probably a dumb question, but I can't seem to find an answer. I just ordered a ZW2 from amazon and was wondering, is there a way to keep the display always on? I know you can turn ambient display on and off, but it still looks like it goes to a low power mode, I was hoping to keep it in full display mode all the time. And if this is possible, how much of a battery drain would I be looking at?
from xda-developers http://ift.tt/1TGJFfH
via IFTTT
g pad uk410 intalled TWRP to bootimg slot
i rooted my us cellular uk410, got in a hurry and installed TWRP zip to the boot image zip slot and never boots. now it's essentially soft bricked. is there any way to recover my tablet?
from xda-developers http://ift.tt/1LMMyoI
via IFTTT
Faulty hardware?
Recently I've been having problems with random lag spikes, reboots and suddenly the screen just going black. This has gradually started happening more and more. Sometimes I've also gotten a boot fail screen wich resets the phone into download mode, other times I've gotten a kernel panic message stating eMMC read fail. To get the phone running again I often have to try several reboots and pull the battery for a couple of seconds. The battery is brand new as I just replaced my old battery that was starting to instantly deplete at around 20%.
It seems like a couple of other people has had this issue.
I've been using the same debloated stock root rom for the past 3-4 months, and it has worked fine, until recently when these problems started occurring. I suspected the source of the problem was xposed modules or an app wreaking havoc on the device. First I tried uninstalling xposed through TWRP, but the problems still occured. Then I tried to do a factory reset through the settings menu, but oddly the phone just restarted without performing any reset. So i figured I had to do a wipe via TWRP, but I got some kind of mounting error. After installing TWRP v3 I managed to wipe and install a new rom.
I tried these roms but the problem still presists after several tries of flashes and wipes.
http://ift.tt/1QgWCfn
http://ift.tt/1YSkMSY
The last thing I have yet to try is to do a clean stock flash through Odin, but chances seem dim as evidence points towards some kind of hardware failure. Flash chip maybe?
If it actually is hardware failure I have the problem of having modified the phone, so even if I go back to a stock unrooted rom the "Kernel is not seandroid enforcing" and "Set warranty bit: kernel" text will still show up during boot. If I am correct there is still no way to remove this, right? Luckily Norwegian laws are quite lenient when it comes hardware fault warranty, with up to 4 years of warranty for phones.
Will the service shop immediatly dismiss phones if they detected a modified system, even if it's 100% guaranteed that the problem is hardware failure? Has anyone had any experience with this?
I know a friend of mine got his rooted Nexus 5 replaced, but that didn't turn on at all, so I think they just replaced it without checking.
It seems like a couple of other people has had this issue.
I've been using the same debloated stock root rom for the past 3-4 months, and it has worked fine, until recently when these problems started occurring. I suspected the source of the problem was xposed modules or an app wreaking havoc on the device. First I tried uninstalling xposed through TWRP, but the problems still occured. Then I tried to do a factory reset through the settings menu, but oddly the phone just restarted without performing any reset. So i figured I had to do a wipe via TWRP, but I got some kind of mounting error. After installing TWRP v3 I managed to wipe and install a new rom.
I tried these roms but the problem still presists after several tries of flashes and wipes.
http://ift.tt/1QgWCfn
http://ift.tt/1YSkMSY
The last thing I have yet to try is to do a clean stock flash through Odin, but chances seem dim as evidence points towards some kind of hardware failure. Flash chip maybe?
If it actually is hardware failure I have the problem of having modified the phone, so even if I go back to a stock unrooted rom the "Kernel is not seandroid enforcing" and "Set warranty bit: kernel" text will still show up during boot. If I am correct there is still no way to remove this, right? Luckily Norwegian laws are quite lenient when it comes hardware fault warranty, with up to 4 years of warranty for phones.
Will the service shop immediatly dismiss phones if they detected a modified system, even if it's 100% guaranteed that the problem is hardware failure? Has anyone had any experience with this?
I know a friend of mine got his rooted Nexus 5 replaced, but that didn't turn on at all, so I think they just replaced it without checking.
from xda-developers http://ift.tt/1TGJHnZ
via IFTTT
Inscription à :
Articles (Atom)