vendredi 6 mai 2016

Alcatel One Touch Pixi 3 (7) Model 9007T - Soft Bricked

I have two of the units mentioned in the thread title. One simply is stuck at the Alcatel logo after a reboot. I can get into the stock recovery, have done a factory reset (plus cache), but still just stuck at the logo. I've also popped it open and unplugged the battery (it's the attached kind), but still back at a logo after everything was back together.

I mentioned that I had two because the other one is working fine and available to use for a firmware dump. The issue I'm running into is that a cat /proc/mtd command returns no partitions (just blank) and there is no emmc on this unit. From what I've read, bad Chinese firmwares sometimes do not report out partition tables from mtd. So, all the guides I've found for using MTK Rom Studio, MTK Droid Tools, and SP Flash Tool don't work for me (at the moment) because I cannot produce a firmware.info or scatter file, due to mtd not populating the required info. Also, from what I gather, there is no firmware file available for this. I've tried using the Mobile Upgrade program from Alcatel, but it reports that the ROM is the most up-to-date and then quits. Yay.

Any help or insight would be greatly appreciated. I'm not desperate or anything; just hoping to get this one back working is all.


from xda-developers http://ift.tt/1rAaEPY
via IFTTT

Aucun commentaire:

Enregistrer un commentaire