In another thread someone asked me to take a picture of my setup so here it is, its a Brodit phone cradle that is custom made for specifically the LG V10 and is mounted to the car using a Kuda leather mount that matches my E550's interior.
Up until recently I have always used CarComm cradles because they use a modular design where you don't need to rewire the car every time you get a new phone but since they didn't make one yet for the V10 I switched to Brodit mount and is hard wired to constant power. The converted box is a 2A charger and is SUPER fast at charging the phone. On my 30 minute commute I get a good 35-40% charge with the GPS running..
pics:
In my previous E-Class (years ago) I used the CarComm cradle and as you can see with this one you only replace the phone holder part and dont have to re-wire the whole thing when you get a new phone:
Up until recently I have always used CarComm cradles because they use a modular design where you don't need to rewire the car every time you get a new phone but since they didn't make one yet for the V10 I switched to Brodit mount and is hard wired to constant power. The converted box is a 2A charger and is SUPER fast at charging the phone. On my 30 minute commute I get a good 35-40% charge with the GPS running..
pics:
In my previous E-Class (years ago) I used the CarComm cradle and as you can see with this one you only replace the phone holder part and dont have to re-wire the whole thing when you get a new phone:
from xda-developers http://ift.tt/1XLkVTW
via IFTTT
Aucun commentaire:
Enregistrer un commentaire